ClickHouse/src/Functions/greatCircleDistance.cpp

#include <DataTypes/DataTypesNumber.h>
#include <Columns/ColumnsNumber.h>
#include <Columns/ColumnConst.h>
#include <Common/typeid_cast.h>
#include <Common/assert_cast.h>
#include <Functions/IFunctionImpl.h>
#include <Functions/FunctionHelpers.h>
#include <Functions/FunctionFactory.h>
#include <Functions/TargetSpecific.h>
#include <Functions/PerformanceAdaptors.h>
#include <ext/range.h>
#include <cmath>


namespace DB
{
namespace ErrorCodes
{
    extern const int ILLEGAL_TYPE_OF_ARGUMENT;
}

/** Calculates the distance between two geographical locations.
  * There are three variants:
  * greatCircleAngle: calculates the distance on a sphere in degrees: https://en.wikipedia.org/wiki/Great-circle_distance
  * greatCircleDistance: calculates the distance on a sphere in meters.
  * geoDistance: calculates the distance on WGS-84 ellipsoid in meters.
  *
  * The function calculates distance between two points on Earth specified by longitude and latitude in degrees.
  *
  * Latitude must be in [-90, 90], longitude must be [-180, 180].
  *
  * Original code of this implementation of this function is here:
  * https://github.com/sphinxsearch/sphinx/blob/409f2c2b5b2ff70b04e38f92b6b1a890326bad65/src/sphinxexpr.cpp#L3825.
  * Andrey Aksenov, the author of original code, permitted to use this code in ClickHouse under the Apache 2.0 license.
  * Presentation about this code from Highload++ Siberia 2019 is here https://github.com/ClickHouse/ClickHouse/files/3324740/1_._._GEODIST_._.pdf
  * The main idea of this implementation is optimisations based on Taylor series, trigonometric identity
  *  and calculated constants once for cosine, arcsine(sqrt) and look up table.
  */

namespace
{

constexpr double PI = 3.14159265358979323846;
constexpr float RAD_IN_DEG = static_cast<float>(PI / 180.0);
constexpr float RAD_IN_DEG_HALF = static_cast<float>(PI / 360.0);

constexpr size_t COS_LUT_SIZE = 1024; // maxerr 0.00063%
constexpr size_t ASIN_SQRT_LUT_SIZE = 512;
constexpr size_t METRIC_LUT_SIZE = 1024;

/** Earth radius in meters using WGS84 authalic radius.
  * We use this value to be consistent with H3 library.
  */
constexpr float EARTH_RADIUS = 6371007.180918475;
constexpr float EARTH_DIAMETER = 2 * EARTH_RADIUS;


float cos_lut[COS_LUT_SIZE + 1];       /// cos(x) table
float asin_sqrt_lut[ASIN_SQRT_LUT_SIZE + 1]; /// asin(sqrt(x)) * earth_diameter table

float sphere_metric_lut[METRIC_LUT_SIZE + 1]; /// sphere metric, unitless: the distance in degrees for one degree across longitude depending on latitude
float sphere_metric_meters_lut[METRIC_LUT_SIZE + 1]; /// sphere metric: the distance in meters for one degree across longitude depending on latitude
float wgs84_metric_meters_lut[2 * (METRIC_LUT_SIZE + 1)]; /// ellipsoid metric: the distance in meters across one degree latitude/longitude depending on latitude


inline double sqr(double v)
{
    return v * v;
}

inline float sqrf(float v)
{
    return v * v;
}

void geodistInit()
{
    for (size_t i = 0; i <= COS_LUT_SIZE; ++i)
        cos_lut[i] = static_cast<float>(cos(2 * PI * i / COS_LUT_SIZE)); // [0, 2 * pi] -> [0, COS_LUT_SIZE]

    for (size_t i = 0; i <= ASIN_SQRT_LUT_SIZE; ++i)
        asin_sqrt_lut[i] = static_cast<float>(asin(
            sqrt(static_cast<double>(i) / ASIN_SQRT_LUT_SIZE))); // [0, 1] -> [0, ASIN_SQRT_LUT_SIZE]

    for (size_t i = 0; i <= METRIC_LUT_SIZE; ++i)
    {
        double latitude = i * (PI / METRIC_LUT_SIZE) - PI * 0.5; // [-pi / 2, pi / 2] -> [0, METRIC_LUT_SIZE]

        /// Squared metric coefficients (for the distance in meters) on a tangent plane, for latitude and longitude (in degrees),
        /// depending on the latitude (in radians).

        /// https://github.com/mapbox/cheap-ruler/blob/master/index.js#L67
        wgs84_metric_meters_lut[i * 2] = static_cast<float>(sqr(111132.09 - 566.05 * cos(2 * latitude) + 1.20 * cos(4 * latitude)));
        wgs84_metric_meters_lut[i * 2 + 1] = static_cast<float>(sqr(111415.13 * cos(latitude) - 94.55 * cos(3 * latitude) + 0.12 * cos(5 * latitude)));

        sphere_metric_meters_lut[i] = static_cast<float>(sqr((EARTH_DIAMETER * PI / 360) * cos(latitude)));

        sphere_metric_lut[i] = cosf(latitude);
    }
}

inline NO_SANITIZE_UNDEFINED size_t floatToIndex(float x)
{
    /// Implementation specific behaviour on overflow or infinite value.
    return static_cast<size_t>(x);
}

inline float geodistDegDiff(float f)
{
    f = fabsf(f);
    if (f > 180)
        f = 360 - f;
    return f;
}

inline float geodistFastCos(float x)
{
    float y = fabsf(x) * (COS_LUT_SIZE / PI / 2);
    size_t i = floatToIndex(y);
    y -= i;
    i &= (COS_LUT_SIZE - 1);
    return cos_lut[i] + (cos_lut[i + 1] - cos_lut[i]) * y;
}

inline float geodistFastSin(float x)
{
    float y = fabsf(x) * (COS_LUT_SIZE / PI / 2);
    size_t i = floatToIndex(y);
    y -= i;
    i = (i - COS_LUT_SIZE / 4) & (COS_LUT_SIZE - 1); // cos(x - pi / 2) = sin(x), costable / 4 = pi / 2
    return cos_lut[i] + (cos_lut[i + 1] - cos_lut[i]) * y;
}

/// fast implementation of asin(sqrt(x))
/// max error in floats 0.00369%, in doubles 0.00072%
inline float geodistFastAsinSqrt(float x)
{
    if (x < 0.122f)
    {
        // distance under 4546 km, Taylor error under 0.00072%
        float y = sqrtf(x);
        return y + x * y * 0.166666666666666f + x * x * y * 0.075f + x * x * x * y * 0.044642857142857f;
    }
    if (x < 0.948f)
    {
        // distance under 17083 km, 512-entry LUT error under 0.00072%
        x *= ASIN_SQRT_LUT_SIZE;
        size_t i = floatToIndex(x);
        return asin_sqrt_lut[i] + (asin_sqrt_lut[i + 1] - asin_sqrt_lut[i]) * (x - i);
    }
    return asinf(sqrtf(x)); // distance over 17083 km, just compute exact
}


enum class Method
{
    SPHERE_DEGREES,
    SPHERE_METERS,
    WGS84_METERS,
};

}

DECLARE_MULTITARGET_CODE(

namespace
{

template <Method method>
float distance(float lon1deg, float lat1deg, float lon2deg, float lat2deg)
{
    float lat_diff = geodistDegDiff(lat1deg - lat2deg);
    float lon_diff = geodistDegDiff(lon1deg - lon2deg);

    if (lon_diff < 13)
    {
        // points are close enough; use flat ellipsoid model
        // interpolate metric coefficients using latitudes midpoint

        /// Why comparing only difference in longitude?
        /// If longitudes are different enough, there is a big difference between great circle line and a line with constant latitude.
        ///  (Remember how a plane flies from Moscow to New York)
        /// But if longitude is close but latitude is different enough, there is no difference between meridian and great circle line.

        float latitude_midpoint = (lat1deg + lat2deg + 180) * METRIC_LUT_SIZE / 360; // [-90, 90] degrees -> [0, KTABLE] indexes
        size_t latitude_midpoint_index = floatToIndex(latitude_midpoint) & (METRIC_LUT_SIZE - 1);

        /// This is linear interpolation between two table items at index "latitude_midpoint_index" and "latitude_midpoint_index + 1".

        float k_lat;
        float k_lon;

        if constexpr (method == Method::SPHERE_DEGREES)
        {
            k_lat = 1;

            k_lon = sphere_metric_lut[latitude_midpoint_index]
                + (sphere_metric_lut[latitude_midpoint_index + 1] - sphere_metric_lut[latitude_midpoint_index]) * (latitude_midpoint - latitude_midpoint_index);
        }
        else if constexpr (method == Method::SPHERE_METERS)
        {
            k_lat = sqr(EARTH_DIAMETER * PI / 360);

            k_lon = sphere_metric_meters_lut[latitude_midpoint_index]
                + (sphere_metric_meters_lut[latitude_midpoint_index + 1] - sphere_metric_meters_lut[latitude_midpoint_index]) * (latitude_midpoint - latitude_midpoint_index);
        }
        else if constexpr (method == Method::WGS84_METERS)
        {
            k_lat = wgs84_metric_meters_lut[latitude_midpoint_index * 2]
                + (wgs84_metric_meters_lut[(latitude_midpoint_index + 1) * 2] - wgs84_metric_meters_lut[latitude_midpoint_index * 2]) * (latitude_midpoint - latitude_midpoint_index);

            k_lon = wgs84_metric_meters_lut[latitude_midpoint_index * 2 + 1]
                + (wgs84_metric_meters_lut[(latitude_midpoint_index + 1) * 2 + 1] - wgs84_metric_meters_lut[latitude_midpoint_index * 2 + 1]) * (latitude_midpoint - latitude_midpoint_index);
        }

        /// Metric on a tangent plane: it differs from Euclidean metric only by scale of coordinates.
        return sqrtf(k_lat * lat_diff * lat_diff + k_lon * lon_diff * lon_diff);
    }
    else
    {
        // points too far away; use haversine

        float a = sqrf(geodistFastSin(lat_diff * RAD_IN_DEG_HALF))
            + geodistFastCos(lat1deg * RAD_IN_DEG) * geodistFastCos(lat2deg * RAD_IN_DEG) * sqrf(geodistFastSin(lon_diff * RAD_IN_DEG_HALF));

        if constexpr (method == Method::SPHERE_DEGREES)
            return (360.0f / PI) * geodistFastAsinSqrt(a);
        else
            return EARTH_DIAMETER * geodistFastAsinSqrt(a);
    }
}

}

template <Method method>
class FunctionGeoDistance : public IFunction
{
public:
    static constexpr auto name =
        (method == Method::SPHERE_DEGREES) ? "greatCircleAngle"
        : ((method == Method::SPHERE_METERS) ? "greatCircleDistance"
            : "geoDistance");

private:
    String getName() const override { return name; }
    size_t getNumberOfArguments() const override { return 4; }

    bool useDefaultImplementationForConstants() const override { return true; }

    DataTypePtr getReturnTypeImpl(const DataTypes & arguments) const override
    {
        for (const auto arg_idx : ext::range(0, arguments.size()))
        {
            const auto * arg = arguments[arg_idx].get();
            if (!isNumber(WhichDataType(arg)))
                throw Exception(
                    "Illegal type " + arg->getName() + " of argument " + std::to_string(arg_idx + 1) + " of function " + getName() + ". Must be numeric",
                    ErrorCodes::ILLEGAL_TYPE_OF_ARGUMENT);
        }

        return std::make_shared<DataTypeFloat32>();
    }

    ColumnPtr executeImpl(const ColumnsWithTypeAndName & arguments, const DataTypePtr &, size_t input_rows_count) const override
    {
        auto dst = ColumnVector<Float32>::create();
        auto & dst_data = dst->getData();
        dst_data.resize(input_rows_count);

        const IColumn & col_lon1 = *arguments[0].column;
        const IColumn & col_lat1 = *arguments[1].column;
        const IColumn & col_lon2 = *arguments[2].column;
        const IColumn & col_lat2 = *arguments[3].column;

        for (size_t row_num = 0; row_num < input_rows_count; ++row_num)
            dst_data[row_num] = distance<method>(
                col_lon1.getFloat32(row_num), col_lat1.getFloat32(row_num),
                col_lon2.getFloat32(row_num), col_lat2.getFloat32(row_num));

        return dst;
    }
};

) // DECLARE_MULTITARGET_CODE

template <Method method>
class FunctionGeoDistance : public TargetSpecific::Default::FunctionGeoDistance<method>
{
public:
    explicit FunctionGeoDistance(const Context & context) : selector(context)
    {
        selector.registerImplementation<TargetArch::Default,
            TargetSpecific::Default::FunctionGeoDistance<method>>();

    #if USE_MULTITARGET_CODE
        selector.registerImplementation<TargetArch::AVX,
            TargetSpecific::AVX::FunctionGeoDistance<method>>();
        selector.registerImplementation<TargetArch::AVX2,
            TargetSpecific::AVX2::FunctionGeoDistance<method>>();
        selector.registerImplementation<TargetArch::AVX512F,
            TargetSpecific::AVX512F::FunctionGeoDistance<method>>();
    #endif
    }

    ColumnPtr executeImpl(const ColumnsWithTypeAndName & arguments, const DataTypePtr & result_type, size_t input_rows_count) const override
    {
        return selector.selectAndExecute(arguments, result_type, input_rows_count);
    }

    static FunctionPtr create(const Context & context)
    {
        return std::make_shared<FunctionGeoDistance<method>>(context);
    }

private:
    ImplementationSelector<IFunction> selector;
};

void registerFunctionGeoDistance(FunctionFactory & factory)
{
    geodistInit();
    factory.registerFunction<FunctionGeoDistance<Method::SPHERE_DEGREES>>();
    factory.registerFunction<FunctionGeoDistance<Method::SPHERE_METERS>>();
    factory.registerFunction<FunctionGeoDistance<Method::WGS84_METERS>>();
}

}