ClickHouse can accept and return data in various formats. A format supported for input can be used to parse the data provided to `INSERT`s, to perform `SELECT`s from a file-backed table such as File, URL or HDFS, or to read an external dictionary. A format supported for output can be used to arrange the
You can control some format processing parameters with the ClickHouse settings. For more information read the [Settings](../operations/settings/settings.md) section.
In TabSeparated format, data is written by row. Each row contains values separated by tabs. Each value is followed by a tab, except the last value in the row, which is followed by a line feed. Strictly Unix line feeds are assumed everywhere. The last row also must contain a line feed at the end. Values are written in text format, without enclosing quotation marks, and with special characters escaped.
The `TabSeparated` format is convenient for processing data using custom programs and scripts. It is used by default in the HTTP interface, and in the command-line client’s batch mode. This format also allows transferring data between different DBMSs. For example, you can get a dump from MySQL and upload it to ClickHouse, or vice versa.
The `TabSeparated` format supports outputting total values (when using WITH TOTALS) and extreme values (when ‘extremes’ is set to 1). In these cases, the total values and extremes are output after the main data. The main result, total values, and extremes are separated from each other by an empty line. Example:
Integer numbers are written in decimal form. Numbers can contain an extra “+” character at the beginning (ignored when parsing, and not recorded when formatting). Non-negative numbers can’t contain the negative sign. When reading, it is allowed to parse an empty string as a zero, or (for signed types) a string consisting of just a minus sign as a zero. Numbers that do not fit into the corresponding data type may be parsed as a different number, without an error message.
Floating-point numbers are written in decimal form. The dot is used as the decimal separator. Exponential entries are supported, as are ‘inf’, ‘+inf’, ‘-inf’, and ‘nan’. An entry of floating-point numbers may begin or end with a decimal point.
Dates with times are written in the format `YYYY-MM-DD hh:mm:ss` and parsed in the same format, but with any characters as separators.
This all occurs in the system time zone at the time the client or server starts (depending on which of them formats data). For dates with times, daylight saving time is not specified. So if a dump has times during daylight saving time, the dump does not unequivocally match the data, and parsing will select one of the two times.
During a read operation, incorrect dates and dates with times can be parsed with natural overflow or as null dates and times, without an error message.
As an exception, parsing dates with times is also supported in Unix timestamp format, if it consists of exactly 10 decimal digits. The result is not time zone-dependent. The formats YYYY-MM-DD hh:mm:ss and NNNNNNNNNN are differentiated automatically.
Strings are output with backslash-escaped special characters. The following escape sequences are used for output: `\b`, `\f`, `\r`, `\n`, `\t`, `\0`, `\'`, `\\`. Parsing also supports the sequences `\a`, `\v`, and `\xHH` (hex escape sequences) and any `\c` sequences, where `c` is any character (these sequences are converted to `c`). Thus, reading data supports formats where a line feed can be written as `\n` or `\`, or as a line feed. For example, the string `Hello world` with a line feed between the words instead of space can be parsed in any of the following variations:
Arrays are written as a list of comma-separated values in square brackets. Number items in the array are formatted as normally. `Date` and `DateTime` types are written in single quotes. Strings are written in single quotes with the same escaping rules as above.
[NULL](../sql-reference/syntax.md) is formatted according to setting [format_tsv_null_representation](../operations/settings/settings.md#settings-format_tsv_null_representation) (default value is `\N`).
If setting [input_format_tsv_empty_as_default](../operations/settings/settings.md#settings-input_format_tsv_empty_as_default) is enabled,
empty input fields are replaced with default values. For complex default expressions [input_format_defaults_for_omitted_fields](../operations/settings/settings.md#settings-input_format_defaults_for_omitted_fields) must be enabled too.
In input data, ENUM values can be represented as names or as ids. First, we try to match the input value to the ENUM name. If we fail and the input value is a number, we try to match this number to ENUM id.
If input data contains only ENUM ids, it's recommended to enable the setting [input_format_tsv_enum_as_number](../operations/settings/settings.md#settings-input_format_tsv_enum_as_number) to optimize ENUM parsing.
During parsing, the first row is expected to contain the column names. You can use column names to determine their position and to check their correctness.
If setting [input_format_with_names_use_header](../operations/settings/settings.md#settings-input_format_with_names_use_header) is set to 1,
the columns from input data will be mapped to the columns from the table by their names, columns with unknown names will be skipped if setting [input_format_skip_unknown_fields](../operations/settings/settings.md#settings-input_format_skip_unknown_fields) is set to 1.
It uses settings `format_template_resultset`, `format_template_row`, `format_template_rows_between_delimiter` and some settings of other formats (e.g.`output_format_json_quote_64bit_integers` when using `JSON` escaping, see further)
the values of `SearchPhrase`, `c` and `price` columns, which are escaped as `Quoted`, `Escaped` and `JSON` will be printed (for select) or will be expected (for insert) between `Search phrase:`, `, count:`, `, ad price: $` and `;` delimiters respectively. For example:
The `format_template_rows_between_delimiter` setting specifies delimiter between rows, which is printed (or expected) after every row except the last one (`\n` by default)
Setting `format_template_resultset` specifies the path to file, which contains a format string for resultset. Format string for resultset has the same syntax as a format string for row and allows to specify a prefix, a suffix and a way to print some additional information. It contains the following placeholders instead of column names:
-`data` is the rows with data in `format_template_row` format, separated by `format_template_rows_between_delimiter`. This placeholder must be the first placeholder in the format string.
-`totals` is the row with total values in `format_template_row` format (when using WITH TOTALS)
-`min` is the row with minimum values in `format_template_row` format (when extremes are set to 1)
-`max` is the row with maximum values in `format_template_row` format (when extremes are set to 1)
-`rows_before_limit` is the minimal number of rows there would have been without LIMIT. Output only if the query contains LIMIT. If the query contains GROUP BY, rows_before_limit_at_least is the exact number of rows there would have been without a LIMIT.
The placeholders `data`, `totals`, `min` and `max` must not have escaping rule specified (or `None` must be specified explicitly). The remaining placeholders may have any escaping rule specified.
If the `format_template_resultset` setting is an empty string, `${data}` is used as default value.
For insert queries format allows skipping some columns or some fields if prefix or suffix (see example).
`PageViews`, `UserID`, `Duration` and `Sign` inside placeholders are names of columns in the table. Values after `Useless field` in rows and after `\nTotal rows:` in suffix will be ignored.
Similar to `Template`, but skips whitespace characters between delimiters and values in the input stream. However, if format strings contain whitespace characters, these characters will be expected in the input stream. Also allows to specify empty placeholders (`${}` or `${:None}`) to split some delimiter into separate parts to ignore spaces between them. Such placeholders are used only for skipping whitespace characters.
It’s possible to read `JSON` using this format, if values of columns have the same order in all rows. For example, the following request can be used for inserting data from output example of format [JSON](#json):
Similar to TabSeparated, but outputs a value in name=value format. Names are escaped the same way as in TabSeparated format, and the = symbol is also escaped.
When there is a large number of small columns, this format is ineffective, and there is generally no reason to use it. Nevertheless, it is no worse than JSONEachRow in terms of efficiency.
Both data output and parsing are supported in this format. For parsing, any order is supported for the values of different columns. It is acceptable for some values to be omitted – they are treated as equal to their default values. In this case, zeros and blank rows are used as default values. Complex values that could be specified in the table are not supported as defaults.
Parsing allows the presence of the additional field `tskv` without the equal sign or a value. This field is ignored.
When formatting, strings are enclosed in double-quotes. A double quote inside a string is output as two double quotes in a row. There are no other rules for escaping characters. Date and date-time are enclosed in double-quotes. Numbers are output without quotes. Values are separated by a delimiter character, which is `,` by default. The delimiter character is defined in the setting [format_csv_delimiter](../operations/settings/settings.md#settings-format_csv_delimiter). Rows are separated using the Unix line feed (LF). Arrays are serialized in CSV as follows: first, the array is serialized to a string as in TabSeparated format, and then the resulting string is output to CSV in double-quotes. Tuples in CSV format are serialized as separate columns (that is, their nesting in the tuple is lost).
\*By default, the delimiter is `,`. See the [format_csv_delimiter](../operations/settings/settings.md#settings-format_csv_delimiter) setting for more information.
When parsing, all values can be parsed either with or without quotes. Both double and single quotes are supported. Strings can also be arranged without quotes. In this case, they are parsed up to the delimiter character or line feed (CR or LF). In violation of the RFC, when parsing strings without quotes, the leading and trailing spaces and tabs are ignored. For the line feed, Unix (LF), Windows (CR LF) and Mac OS Classic (CR LF) types are all supported.
If setting [input_format_csv_empty_as_default](../operations/settings/settings.md#settings-input_format_csv_empty_as_default) is enabled,
empty unquoted input values are replaced with default values. For complex default expressions [input_format_defaults_for_omitted_fields](../operations/settings/settings.md#settings-input_format_defaults_for_omitted_fields) must be enabled too.
`NULL` is formatted according to setting [format_csv_null_representation](../operations/settings/settings.md#settings-format_csv_null_representation) (default value is `\N`).
In input data, ENUM values can be represented as names or as ids. First, we try to match the input value to the ENUM name. If we fail and the input value is a number, we try to match this number to ENUM id.
If input data contains only ENUM ids, it's recommended to enable the setting [input_format_csv_enum_as_number](../operations/settings/settings.md#settings-input_format_csv_enum_as_number) to optimize ENUM parsing.
Similar to [Template](#format-template), but it prints or reads all names and types of columns and uses escaping rule from [format_custom_escaping_rule](../operations/settings/settings.md#format-custom-escaping-rule) setting and delimiters from [format_custom_field_delimiter](../operations/settings/settings.md#format-custom-field-delimiter), [format_custom_row_before_delimiter](../operations/settings/settings.md#format-custom-row-before-delimiter), [format_custom_row_after_delimiter](../operations/settings/settings.md#format-custom-row-after-delimiter), [format_custom_row_between_delimiter](../operations/settings/settings.md#format-custom-row-between-delimiter), [format_custom_result_before_delimiter](../operations/settings/settings.md#format-custom-result-before-delimiter) and [format_custom_result_after_delimiter](../operations/settings/settings.md#format-custom-result-after-delimiter) settings, not from format strings.
There is also `CustomSeparatedIgnoreSpaces` format, which is similar to [TemplateIgnoreSpaces](#templateignorespaces).
Outputs data in JSON format. Besides data tables, it also outputs column names and types, along with some additional information: the total number of output rows, and the number of rows that could have been output if there weren’t a LIMIT. Example:
The JSON is compatible with JavaScript. To ensure this, some characters are additionally escaped: the slash `/` is escaped as `\/`; alternative line breaks `U+2028` and `U+2029`, which break some browsers, are escaped as `\uXXXX`. ASCII control characters are escaped: backspace, form feed, line feed, carriage return, and horizontal tab are replaced with `\b`, `\f`, `\n`, `\r`, `\t` , as well as the remaining bytes in the 00-1F range using `\uXXXX` sequences. Invalid UTF-8 sequences are changed to the replacement character <20> so the output text will consist of valid UTF-8 sequences. For compatibility with JavaScript, Int64 and UInt64 integers are enclosed in double-quotes by default. To remove the quotes, you can set the configuration parameter [output_format_json_quote_64bit_integers](../operations/settings/settings.md#session_settings-output_format_json_quote_64bit_integers) to 0.
ClickHouse supports [NULL](../sql-reference/syntax.md), which is displayed as `null` in the JSON output. To enable `+nan`, `-nan`, `+inf`, `-inf` values in output, set the [output_format_json_quote_denormals](../operations/settings/settings.md#settings-output_format_json_quote_denormals) to 1.
In this format, a single JSON object is interpreted as a single value. If the input has several JSON objects (comma separated), they are interpreted as separate rows. If the input data is enclosed in square brackets, it is interpreted as an array of JSONs.
This format can only be parsed for table with a single field of type [String](../sql-reference/data-types/string.md). The remaining columns must be set to [DEFAULT](../sql-reference/statements/create/table.md#default) or [MATERIALIZED](../sql-reference/statements/create/table.md#materialized), or omitted. Once you collect whole JSON object to string you can use [JSON functions](../sql-reference/functions/json-functions.md) to process it.
Differs from `JSONCompactEachRow` format in that it also prints the header row with column names, similar to [TabSeparatedWithNames](#tabseparatedwithnames).
Differs from `JSONCompactEachRow` format in that it also prints two header rows with column names and types, similar to [TabSeparatedWithNamesAndTypes](#tabseparatedwithnamesandtypes).
Differs from `JSONCompactStringsEachRow` in that in that it also prints the header row with column names, similar to [TabSeparatedWithNames](#tabseparatedwithnames).
Differs from `JSONCompactStringsEachRow` in that it also prints two header rows with column names and types, similar to [TabSeparatedWithNamesAndTypes](#tabseparatedwithnamesandtypes).
INSERT INTO UserActivity FORMAT JSONEachRow {"PageViews":5, "UserID":"4324182021466249494", "Duration":146,"Sign":-1} {"UserID":"4324182021466249494","PageViews":6,"Duration":185,"Sign":1}
ClickHouse ignores spaces between elements and commas after the objects. You can pass all the objects in one line. You do not have to separate them with line breaks.
If `DEFAULT expr` is specified, ClickHouse uses different substitution rules depending on the [input_format_defaults_for_omitted_fields](../operations/settings/settings.md#session_settings-input_format_defaults_for_omitted_fields) setting.
- If `input_format_defaults_for_omitted_fields = 0`, then the default value for `x` and `a` equals `0` (as the default value for the `UInt32` data type).
- If `input_format_defaults_for_omitted_fields = 1`, then the default value for `x` equals `0`, but the default value of `a` equals `x * 2`.
When inserting data with `input_format_defaults_for_omitted_fields = 1`, ClickHouse consumes more computational resources, compared to insertion with `input_format_defaults_for_omitted_fields = 0`.
Any set of bytes can be output in the strings. Use the `JSONEachRow` format if you are sure that the data in the table can be formatted as JSON without losing any information.
If you have a table with [Nested](../sql-reference/data-types/nested-data-structures/nested.md) data type columns, you can insert JSON data with the same structure. Enable this feature with the [input_format_import_nested_json](../operations/settings/settings.md#settings-input_format_import_nested_json) setting.
As you can see in the `Nested` data type description, ClickHouse treats each component of the nested structure as a separate column (`n.s` and `n.i` for our table). You can insert data in the following way:
To insert data as a hierarchical JSON object, set [input_format_import_nested_json=1](../operations/settings/settings.md#settings-input_format_import_nested_json).
The most efficient format. Data is written and read by blocks in binary format. For each block, the number of rows, number of columns, column names and types, and parts of columns in this block are recorded one after another. In other words, this format is “columnar” – it does not convert columns to rows. This is the format used in the native interface for interaction between servers, for using the command-line client, and for C++ clients.
You can use this format to quickly generate dumps that can only be read by the ClickHouse DBMS. It does not make sense to work with this format yourself.
Nothing is output. However, the query is processed, and when using the command-line client, data is transmitted to the client. This is used for tests, including performance testing.
A full grid of the table is drawn, and each row occupies two lines in the terminal.
Each result block is output as a separate table. This is necessary so that blocks can be output without buffering results (buffering would be necessary in order to pre-calculate the visible width of all the values).
To avoid dumping too much data to the terminal, only the first 10,000 rows are printed. If the number of rows is greater than or equal to 10,000, the message “Showed first 10 000” is printed.
The Pretty format supports outputting total values (when using WITH TOTALS) and extremes (when ‘extremes’ is set to 1). In these cases, total values and extreme values are output after the main data, in separate tables. Example (shown for the [PrettyCompact](#prettycompact) format):
Differs from Pretty in that ANSI-escape sequences aren’t used. This is necessary for displaying this format in a browser, as well as for using the ‘watch’ command-line utility.
For [NULL](../sql-reference/syntax.md#null-literal) support, an additional byte containing 1 or 0 is added before each [Nullable](../sql-reference/data-types/nullable.md) value. If 1, then the value is `NULL` and this byte is interpreted as a separate value. If 0, the value after the byte is not `NULL`.
Prints every row in brackets. Rows are separated by commas. There is no comma after the last row. The values inside the brackets are also comma-separated. Numbers are output in a decimal format without quotes. Arrays are output in square brackets. Strings, dates, and dates with times are output in quotes. Escaping rules and parsing are similar to the [TabSeparated](#tabseparated) format. During formatting, extra spaces aren’t inserted, but during parsing, they are allowed and skipped (except for spaces inside array values, which are not allowed). [NULL](../sql-reference/syntax.md) is represented as `NULL`.
See also: [input_format_values_interpret_expressions](../operations/settings/settings.md#settings-input_format_values_interpret_expressions) and [input_format_values_deduce_templates_of_expressions](../operations/settings/settings.md#settings-input_format_values_deduce_templates_of_expressions) settings.
Prints each value on a separate line with the column name specified. This format is convenient for printing just one or a few rows if each row consists of a large number of columns.
If the column name does not have an acceptable format, just ‘field’ is used as the element name. In general, the XML structure follows the JSON structure.
CapnProto is a binary message format similar to [Protocol Buffers](https://developers.google.com/protocol-buffers/) and [Thrift](https://en.wikipedia.org/wiki/Apache_Thrift), but not like [JSON](#json) or [MessagePack](https://msgpack.org/).
CapnProto messages are strictly typed and not self-describing, meaning they need an external schema description. The schema is applied on the fly and cached for each query.
See also [Format Schema](#formatschema).
### Data Types Matching {#data_types-matching-capnproto}
The table below shows supported data types and how they match ClickHouse [data types](../sql-reference/data-types/index.md) in `INSERT` and `SELECT` queries.
| CapnProto data type (`INSERT`) | ClickHouse data type | CapnProto data type (`SELECT`) |
For working with `Enum` in CapnProto format use the [format_capn_proto_enum_comparising_mode](../operations/settings/settings.md#format-capn-proto-enum-comparising-mode) setting.
Arrays can be nested and can have a value of the `Nullable` type as an argument. `Tuple` type also can be nested.
ClickHouse inputs and outputs protobuf messages in the `length-delimited` format.
It means before every message should be written its length as a [varint](https://developers.google.com/protocol-buffers/docs/encoding#varints).
See also [how to read/write length-delimited protobuf messages in popular languages](https://cwiki.apache.org/confluence/display/GEODE/Delimiting+Protobuf+Messages).
The table below shows supported data types and how they match ClickHouse [data types](../sql-reference/data-types/index.md) in `INSERT` and `SELECT` queries.
\* `bytes` is default, controlled by [output_format_avro_string_column_pattern](../operations/settings/settings.md#settings-output_format_avro_string_column_pattern)
Data types of ClickHouse table columns can differ from the corresponding fields of the Avro data inserted. When inserting data, ClickHouse interprets data types according to the table above and then [casts](../sql-reference/functions/type-conversion-functions.md#type_conversion_function-cast) the data to corresponding column type.
Output Avro file compression and sync interval can be configured with [output_format_avro_codec](../operations/settings/settings.md#settings-output_format_avro_codec) and [output_format_avro_sync_interval](../operations/settings/settings.md#settings-output_format_avro_sync_interval) respectively.
AvroConfluent supports decoding single-object Avro messages commonly used with [Kafka](https://kafka.apache.org/) and [Confluent Schema Registry](https://docs.confluent.io/current/schema-registry/index.html).
Each Avro message embeds a schema id that can be resolved to the actual schema with help of the Schema Registry.
To quickly verify schema resolution you can use [kafkacat](https://github.com/edenhill/kafkacat) with [clickhouse-local](../operations/utilities/clickhouse-local.md):
Setting `format_avro_schema_registry_url` needs to be configured in `users.xml` to maintain it’s value after a restart. Also you can use the `format_avro_schema_registry_url` setting of the `Kafka` table engine.
[Apache Parquet](https://parquet.apache.org/) is a columnar storage format widespread in the Hadoop ecosystem. ClickHouse supports read and write operations for this format.
The table below shows supported data types and how they match ClickHouse [data types](../sql-reference/data-types/index.md) in `INSERT` and `SELECT` queries.
ClickHouse supports configurable precision of `Decimal` type. The `INSERT` query treats the Parquet `DECIMAL` type as the ClickHouse `Decimal128` type.
Data types of ClickHouse table columns can differ from the corresponding fields of the Parquet data inserted. When inserting data, ClickHouse interprets data types according to the table above and then [cast](../sql-reference/functions/type-conversion-functions/#type_conversion_function-cast) the data to that data type which is set for the ClickHouse table column.
To insert data into [Nested](../sql-reference/data-types/nested-data-structures/nested.md) columns as an array of structs values you must switch on the [input_format_parquet_import_nested](../operations/settings/settings.md#input_format_parquet_import_nested) setting.
[Apache Arrow](https://arrow.apache.org/) comes with two built-in columnar storage formats. ClickHouse supports read and write operations for these formats.
The table below shows supported data types and how they match ClickHouse [data types](../sql-reference/data-types/index.md) in `INSERT` and `SELECT` queries.
| Arrow data type (`INSERT`) | ClickHouse data type | Arrow data type (`SELECT`) |
Arrays can be nested and can have a value of the `Nullable` type as an argument. `Tuple` and `Map` types also can be nested.
The `DICTIONARY` type is supported for `INSERT` queries, and for `SELECT` queries there is an [output_format_arrow_low_cardinality_as_dictionary](../operations/settings/settings.md#output-format-arrow-low-cardinality-as-dictionary) setting that allows to output [LowCardinality](../sql-reference/data-types/lowcardinality.md) type as a `DICTIONARY` type.
ClickHouse supports configurable precision of the `Decimal` type. The `INSERT` query treats the Arrow `DECIMAL` type as the ClickHouse `Decimal128` type.
Unsupported Arrow data types: `TIME32`, `FIXED_SIZE_BINARY`, `JSON`, `UUID`, `ENUM`.
The data types of ClickHouse table columns do not have to match the corresponding Arrow data fields. When inserting data, ClickHouse interprets data types according to the table above and then [casts](../sql-reference/functions/type-conversion-functions.md#type_conversion_function-cast) the data to the data type set for the ClickHouse table column.
To insert data into [Nested](../sql-reference/data-types/nested-data-structures/nested.md) columns as an array of structs values you must switch on the [input_format_arrow_import_nested](../operations/settings/settings.md#input_format_arrow_import_nested) setting.
The table below shows supported data types and how they match ClickHouse [data types](../sql-reference/data-types/index.md) in `INSERT` and `SELECT` queries.
ClickHouse supports configurable precision of the `Decimal` type. The `INSERT` query treats the ORC `DECIMAL` type as the ClickHouse `Decimal128` type.
The data types of ClickHouse table columns do not have to match the corresponding ORC data fields. When inserting data, ClickHouse interprets data types according to the table above and then [casts](../sql-reference/functions/type-conversion-functions.md#type_conversion_function-cast) the data to the data type set for the ClickHouse table column.
To insert data into [Nested](../sql-reference/data-types/nested-data-structures/nested.md) columns as an array of structs values you must switch on the [input_format_orc_import_nested](../operations/settings/settings.md#input_format_orc_import_nested) setting.
In this format, every line of input data is interpreted as a single string value. This format can only be parsed for table with a single field of type [String](../sql-reference/data-types/string.md). The remaining columns must be set to [DEFAULT](../sql-reference/statements/create/table.md#default) or [MATERIALIZED](../sql-reference/statements/create/table.md#materialized), or omitted.
-`format_regexp` — [String](../sql-reference/data-types/string.md). Contains regular expression in the [re2](https://github.com/google/re2/wiki/Syntax) format.
-`format_regexp_escaping_rule` — [String](../sql-reference/data-types/string.md). The following escaping rules are supported:
- CSV (similarly to [CSV](#csv))
- JSON (similarly to [JSONEachRow](#jsoneachrow))
- Escaped (similarly to [TSV](#tabseparated))
- Quoted (similarly to [Values](#data-format-values))
-`format_regexp_skip_unmatched` — [UInt8](../sql-reference/data-types/int-uint.md). Defines the need to throw an exeption in case the `format_regexp` expression does not match the imported data. Can be set to `0` or `1`.
The regular expression from `format_regexp` setting is applied to every line of imported data. The number of subpatterns in the regular expression must be equal to the number of columns in imported dataset.
If the regular expression does not match the line and `format_regexp_skip_unmatched` is set to 1, the line is silently skipped. If `format_regexp_skip_unmatched` is set to 0, exception is thrown.
If you input or output data via the [client](../interfaces/cli.md) in the [interactive mode](../interfaces/cli.md#cli_usage), the file name specified in the format schema
should be located in the directory specified in [format_schema_path](../operations/server-configuration-parameters/settings.md#server_configuration_parameters-format_schema_path)
Some formats such as `CSV`, `TabSeparated`, `TSKV`, `JSONEachRow`, `Template`, `CustomSeparated` and `Protobuf` can skip broken row if parsing error occurred and continue parsing from the beginning of next row. See [input_format_allow_errors_num](../operations/settings/settings.md#settings-input_format_allow_errors_num) and
- In case of parsing error `JSONEachRow` skips all data until the new line (or EOF), so rows must be delimited by `\n` to count errors correctly.
-`Template` and `CustomSeparated` use delimiter after the last column and delimiter between rows to find the beginning of next row, so skipping errors works only if at least one of them is not empty.
In this format, all input data is read to a single value. It is possible to parse only a table with a single field of type [String](../sql-reference/data-types/string.md) or similar.
The result is output in binary format without delimiters and escaping. If more than one value is output, the format is ambiguous, and it will be impossible to read the data back.
- String fields are output without being prefixed by length.
`RowBinary`:
- String fields are represented as length in varint format (unsigned [LEB128] (https://en.wikipedia.org/wiki/LEB128)), followed by the bytes of the string.
