- This commit restores statements "SYSTEM RELOAD MODEL(S)" which provide
a mechanism to update a model explicitly. It also saves potentially
unnecessary reloads of a model from disk after it's initial load.
To keep the complexity low, the semantics of "SYSTEM RELOAD MODEL(S)
was changed from eager to lazy. This means that both statements
previously immedately reloaded the specified/all models, whereas now
the statements only trigger an unload and the first call to
catboostEvaluate() does the actual load.
- Monitoring view SYSTEM.MODELS is also restored but with some obsolete
fields removed. The view was not documented in the past and for now it
remains undocumented. The commit is thus not considered a breach of
ClickHouse's public interface.
This has been implemented by simply restarting http servers in case of
http_handlers directive in configuration xml had been changed.
But, for this I have to change the handlers interface to accept
configuration separatelly, since the configuration that contains in the
server is the configuration with which server had been started.
Signed-off-by: Azat Khuzhin <a.khuzhin@semrush.com>
Co-authored-by: Antonio Andelic
- The deleted function modelEvaluate() was superseded by
catboostEvaluate().
- Also delete the external model repository, as modelEvaluate() was it's
last user. Additionally remove the system view SYSTEM.MODELS for
inspecting the repository.
- SYSTEM RELOAD MODELS is also obsolete. HOWEVER, it was retained and
made a no-op instead of deleted.
Why?
The reason is that RBAC in distributed setups works by storing
privileges (granted and revoked) as plain SQL statements in Keeper.
Nodes read these statements at startup and parse them. If a privilege
for SYSTEM RELOAD MODELS exists but parser doesn't recognize it
nodes would fail to come up.
Considered but rejected alternatives:
- Ignore SYSTEM RELOAD MODELS during parsing RBAC privileges and
return an error for regular SYSTEM RELOAD MODELS SQL. Special-case
of no-op behavior, too brittle.
- Remove SYSTEM RELOAD MODELS manually from Keeper via command-line
manipulation of Keeper nodes or via SQL by dropping the privileges.
Needs user intervention during upgrade.
This commit moves the catboost model evaluation out of the server
process into the library-bridge binary. This serves two goals: On the
one hand, crashes / memory corruptions of the catboost library no longer
affect the server. On the other hand, we can forbid loading dynamic
libraries in the server (catboost was the last consumer of this
functionality), thus improving security.
SQL syntax:
SELECT
catboostEvaluate('/path/to/model.bin', FEAT_1, ..., FEAT_N) > 0 AS prediction,
ACTION AS target
FROM amazon_train
LIMIT 10
Required configuration:
<catboost_lib_path>/path/to/libcatboostmodel.so</catboost_lib_path>
*** Implementation Details ***
The internal protocol between the server and the library-bridge is
simple:
- HTTP GET on path "/extdict_ping":
A ping, used during the handshake to check if the library-bridge runs.
- HTTP POST on path "extdict_request"
(1) Send a "catboost_GetTreeCount" request from the server to the
bridge, containing a library path (e.g /home/user/libcatboost.so) and
a model path (e.g. /home/user/model.bin). Rirst, this unloads the
catboost library handler associated to the model path (if it was
loaded), then loads the catboost library handler associated to the
model path, then executes GetTreeCount() on the library handler and
finally sends the result back to the server. Step (1) is called once
by the server from FunctionCatBoostEvaluate::getReturnTypeImpl(). The
library path handler is unloaded in the beginning because it contains
state which may no longer be valid if the user runs
catboost("/path/to/model.bin", ...) more than once and if "model.bin"
was updated in between.
(2) Send "catboost_Evaluate" from the server to the bridge, containing
the model path and the features to run the interference on. Step (2)
is called multiple times (once per chunk) by the server from function
FunctionCatBoostEvaluate::executeImpl(). The library handler for the
given model path is expected to be already loaded by Step (1).
Fixes#27870
- In general, it is expected that clickhouse-*-bridges and
clickhouse-server were build from the same source version (e.g. are
upgraded "atomically"). If that is not the case, we should at least
be able to detect the mismatch and abort.
- This commit adds a URL parameter "version", defined in a header shared
by the server and bridges. The bridge returns an error in case of
mismatch.
- The version is *not* send and checked for "ping" requests (used for
handshake), only for regular requests send after handshake. This is
because the internally thrown server-side exception due to HTTP
failure does not propagate the exact HTTP error (it only stores the
error as text), and as a result, the server-side handshake code
simply retries in case of error with exponential backoff and finally
fails with a "timeout error". This is reasonable as pings typically
fail due to time out. However, without a rework of HTTP exceptions,
version mismatch during ping would also appear as "timeout" which is
too misleading. The behavior may be changed later if needed.
- Note that introducing a version parameter does not represent a
protocol upgrade itself. Bridges older than the server will simply
ignore the field. Only servers older than the bridges receive an error
but such a situation should never occur in practice.
Wall of text, sorry, but I also had to document some stuff for myself:
There are three ways to communicate data using HTTP:
- the HTTP verb: for our purposes, PUT and GET,
- the HTTP path: '/ping', '/request' etc.,
- the HTTP URL parameter(s), e.g. 'method=libNew&dictionary_id=1234'
The bridge will use different handlers for communication with the
external dictionary library and for communication with the catboost
library. Handlers are created based on a combination of the HTTP verb
and the HTTP method. More specifically, there will be combinations
- GET + '/extdict_ping'
- PUT + '/extdict_request'
- GET + '/catboost_ping'
- PUT + '/catboost_request'.
For each combination, the bridge expects a certain set of URL
parameters, e.g. for the first combination parameter "dictionary_id" is
expected.
Starting with this commit, the library-bridge creates handlers based on
the first two combinations (the latter two combinations will be added
later). This makes the handler creation mechanism consistent with it's
counterpart in xdbc-bridge.
For that, it was necessary to make both IBridgeHelper methods
"getMainURI()" and "getPingURI()" pure virtual so that derived classes
(LibraryBridgeHelper and XDBCBridgeHelper) must provide custom URLs with
custom paths.
Side note 1: Previously, LibraryBridgeHelper sent HTTP URL parameter
"method=ping" during handshake (PING) but the library-bridge ignored
that parameter. We now omit this parameter, i.e.
LibraryBridgeHelper::PING was removed. Again, this makes things
consistent with xdbc-bridge.
Side note 2: xdbc-bridge is unchanged in this commit. Therefore,
XDBCBridgeHelper now uses the HTTP paths previously in the base class.
For funny reason, XDBCBridgeHelper did not use
IBridgeHelper::getMainURI() - it generates the URLs by itself. I kept it
that way for now but provided an implementation of getMainURI() anyways.
- Rename generic file and identifier names in library-bridge to
something more dictionary-specific. This is needed because later on,
catboost will be integrated into library-bridge.
- Also: Some smaller fixes like typos and un-inlining non-performance
critical code.
- The logic remains unchanged in this commit.
- Introduced with the C++20 <bit> header
- The problem with __builtin_c(l|t)z() is that 0 as input has an
undefined result (*) and the code did not always check. The std::
versions do not have this issue.
- In some cases, we continue to use buildin_c(l|t)z(), (e.g. in
src/Common/BitHelpers.h) because the std:: versions only accept
unsigned inputs (and they also check that) and the casting would be
ugly.
(*) https://gcc.gnu.org/onlinedocs/gcc/Other-Builtins.html
- Add status log message
- Add it to clickhouse-bundle in shared build
- Move clickhouse-su.cpp into su.cpp, since executable does not have
include directories of linked libraries (dbms here), only
clickhouse-lib-su does, hence it cannot find includes
CI: https://github.com/ClickHouse/ClickHouse/runs/7566319416?check_suite_focus=true
Signed-off-by: Azat Khuzhin <a.khuzhin@semrush.com>
