--- sidebar_label: Installation sidebar_position: 1 keywords: [clickhouse, install, installation, docs] description: ClickHouse can run on any Linux, FreeBSD, or Mac OS X with x86_64, AArch64, or PowerPC64LE CPU architecture. slug: /en/getting-started/install --- # Installation {#installation} ## System Requirements {#system-requirements} ClickHouse can run on any Linux, FreeBSD, or Mac OS X with x86_64, AArch64, or PowerPC64LE CPU architecture. Official pre-built binaries are typically compiled for x86_64 and leverage SSE 4.2 instruction set, so unless otherwise stated usage of CPU that supports it becomes an additional system requirement. Here’s the command to check if current CPU has support for SSE 4.2: ``` bash $ grep -q sse4_2 /proc/cpuinfo && echo "SSE 4.2 supported" || echo "SSE 4.2 not supported" ``` To run ClickHouse on processors that do not support SSE 4.2 or have AArch64 or PowerPC64LE architecture, you should [build ClickHouse from sources](#from-sources) with proper configuration adjustments. ## Available Installation Options {#available-installation-options} ### From DEB Packages {#install-from-deb-packages} It is recommended to use official pre-compiled `deb` packages for Debian or Ubuntu. Run these commands to install packages: ``` bash sudo apt-get install -y apt-transport-https ca-certificates dirmngr sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 8919F6BD2B48D754 echo "deb https://packages.clickhouse.com/deb stable main" | sudo tee \ /etc/apt/sources.list.d/clickhouse.list sudo apt-get update sudo apt-get install -y clickhouse-server clickhouse-client sudo service clickhouse-server start clickhouse-client # or "clickhouse-client --password" if you've set up a password. ```
Deprecated Method for installing deb-packages ``` bash sudo apt-get install apt-transport-https ca-certificates dirmngr sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv E0C56BD4 echo "deb https://repo.clickhouse.com/deb/stable/ main/" | sudo tee \ /etc/apt/sources.list.d/clickhouse.list sudo apt-get update sudo apt-get install -y clickhouse-server clickhouse-client sudo service clickhouse-server start clickhouse-client # or "clickhouse-client --password" if you set up a password. ```
You can replace `stable` with `lts` or `testing` to use different [release trains](../faq/operations/production.md) based on your needs. You can also download and install packages manually from [here](https://packages.clickhouse.com/deb/pool/stable). #### Packages {#packages} - `clickhouse-common-static` — Installs ClickHouse compiled binary files. - `clickhouse-server` — Creates a symbolic link for `clickhouse-server` and installs the default server configuration. - `clickhouse-client` — Creates a symbolic link for `clickhouse-client` and other client-related tools. and installs client configuration files. - `clickhouse-common-static-dbg` — Installs ClickHouse compiled binary files with debug info. :::info If you need to install specific version of ClickHouse you have to install all packages with the same version: `sudo apt-get install clickhouse-server=21.8.5.7 clickhouse-client=21.8.5.7 clickhouse-common-static=21.8.5.7` ::: ### From RPM Packages {#from-rpm-packages} It is recommended to use official pre-compiled `rpm` packages for CentOS, RedHat, and all other rpm-based Linux distributions. First, you need to add the official repository: ``` bash sudo yum install -y yum-utils sudo yum-config-manager --add-repo https://packages.clickhouse.com/rpm/clickhouse.repo sudo yum install -y clickhouse-server clickhouse-client sudo /etc/init.d/clickhouse-server start clickhouse-client # or "clickhouse-client --password" if you set up a password. ```
Deprecated Method for installing rpm-packages ``` bash sudo yum install yum-utils sudo rpm --import https://repo.clickhouse.com/CLICKHOUSE-KEY.GPG sudo yum-config-manager --add-repo https://repo.clickhouse.com/rpm/clickhouse.repo sudo yum install clickhouse-server clickhouse-client sudo /etc/init.d/clickhouse-server start clickhouse-client # or "clickhouse-client --password" if you set up a password. ```
If you want to use the most recent version, replace `stable` with `testing` (this is recommended for your testing environments). `prestable` is sometimes also available. Then run these commands to install packages: ``` bash sudo yum install clickhouse-server clickhouse-client ``` You can also download and install packages manually from [here](https://packages.clickhouse.com/rpm/stable). ### From Tgz Archives {#from-tgz-archives} It is recommended to use official pre-compiled `tgz` archives for all Linux distributions, where installation of `deb` or `rpm` packages is not possible. The required version can be downloaded with `curl` or `wget` from repository https://packages.clickhouse.com/tgz/. After that downloaded archives should be unpacked and installed with installation scripts. Example for the latest stable version: ``` bash LATEST_VERSION=$(curl -s https://packages.clickhouse.com/tgz/stable/ | \ grep -Eo '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+' | sort -V -r | head -n 1) export LATEST_VERSION curl -O "https://packages.clickhouse.com/tgz/stable/clickhouse-common-static-$LATEST_VERSION.tgz" curl -O "https://packages.clickhouse.com/tgz/stable/clickhouse-common-static-dbg-$LATEST_VERSION.tgz" curl -O "https://packages.clickhouse.com/tgz/stable/clickhouse-server-$LATEST_VERSION.tgz" curl -O "https://packages.clickhouse.com/tgz/stable/clickhouse-client-$LATEST_VERSION.tgz" tar -xzvf "clickhouse-common-static-$LATEST_VERSION.tgz" sudo "clickhouse-common-static-$LATEST_VERSION/install/doinst.sh" tar -xzvf "clickhouse-common-static-dbg-$LATEST_VERSION.tgz" sudo "clickhouse-common-static-dbg-$LATEST_VERSION/install/doinst.sh" tar -xzvf "clickhouse-server-$LATEST_VERSION.tgz" sudo "clickhouse-server-$LATEST_VERSION/install/doinst.sh" sudo /etc/init.d/clickhouse-server start tar -xzvf "clickhouse-client-$LATEST_VERSION.tgz" sudo "clickhouse-client-$LATEST_VERSION/install/doinst.sh" ```
Deprecated Method for installing tgz archives ``` bash export LATEST_VERSION=$(curl -s https://repo.clickhouse.com/tgz/stable/ | \ grep -Eo '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+' | sort -V -r | head -n 1) curl -O https://repo.clickhouse.com/tgz/stable/clickhouse-common-static-$LATEST_VERSION.tgz curl -O https://repo.clickhouse.com/tgz/stable/clickhouse-common-static-dbg-$LATEST_VERSION.tgz curl -O https://repo.clickhouse.com/tgz/stable/clickhouse-server-$LATEST_VERSION.tgz curl -O https://repo.clickhouse.com/tgz/stable/clickhouse-client-$LATEST_VERSION.tgz tar -xzvf clickhouse-common-static-$LATEST_VERSION.tgz sudo clickhouse-common-static-$LATEST_VERSION/install/doinst.sh tar -xzvf clickhouse-common-static-dbg-$LATEST_VERSION.tgz sudo clickhouse-common-static-dbg-$LATEST_VERSION/install/doinst.sh tar -xzvf clickhouse-server-$LATEST_VERSION.tgz sudo clickhouse-server-$LATEST_VERSION/install/doinst.sh sudo /etc/init.d/clickhouse-server start tar -xzvf clickhouse-client-$LATEST_VERSION.tgz sudo clickhouse-client-$LATEST_VERSION/install/doinst.sh ```
For production environments, it’s recommended to use the latest `stable`-version. You can find its number on GitHub page https://github.com/ClickHouse/ClickHouse/tags with postfix `-stable`. ### From Docker Image {#from-docker-image} To run ClickHouse inside Docker follow the guide on [Docker Hub](https://hub.docker.com/r/clickhouse/clickhouse-server/). Those images use official `deb` packages inside. ### Single Binary {#from-single-binary} You can install ClickHouse on Linux using a single portable binary from the latest commit of the `master` branch: [https://builds.clickhouse.com/master/amd64/clickhouse]. ``` bash curl -O 'https://builds.clickhouse.com/master/amd64/clickhouse' && chmod a+x clickhouse sudo ./clickhouse install ``` ### From Precompiled Binaries for Non-Standard Environments {#from-binaries-non-linux} For non-Linux operating systems and for AArch64 CPU arhitecture, ClickHouse builds are provided as a cross-compiled binary from the latest commit of the `master` branch (with a few hours delay). - [MacOS x86_64](https://builds.clickhouse.com/master/macos/clickhouse) ```bash curl -O 'https://builds.clickhouse.com/master/macos/clickhouse' && chmod a+x ./clickhouse ``` - [MacOS Aarch64 (Apple Silicon)](https://builds.clickhouse.com/master/macos-aarch64/clickhouse) ```bash curl -O 'https://builds.clickhouse.com/master/macos-aarch64/clickhouse' && chmod a+x ./clickhouse ``` - [FreeBSD x86_64](https://builds.clickhouse.com/master/freebsd/clickhouse) ```bash curl -O 'https://builds.clickhouse.com/master/freebsd/clickhouse' && chmod a+x ./clickhouse ``` - [Linux AArch64](https://builds.clickhouse.com/master/aarch64/clickhouse) ```bash curl -O 'https://builds.clickhouse.com/master/aarch64/clickhouse' && chmod a+x ./clickhouse ``` Run `sudo ./clickhouse install` to install ClickHouse system-wide (also with needed configuration files, configuring users etc.). Then run `clickhouse start` commands to start the clickhouse-server and `clickhouse-client` to connect to it. Use the `clickhouse client` to connect to the server, or `clickhouse local` to process local data. ### From Sources {#from-sources} To manually compile ClickHouse, follow the instructions for [Linux](../development/build.md) or [Mac OS X](../development/build-osx.md). You can compile packages and install them or use programs without installing packages. Also by building manually you can disable SSE 4.2 requirement or build for AArch64 CPUs. Client: programs/clickhouse-client Server: programs/clickhouse-server You’ll need to create a data and metadata folders and `chown` them for the desired user. Their paths can be changed in server config (src/programs/server/config.xml), by default they are: /var/lib/clickhouse/data/default/ /var/lib/clickhouse/metadata/default/ On Gentoo, you can just use `emerge clickhouse` to install ClickHouse from sources. ## Launch {#launch} To start the server as a daemon, run: ``` bash $ sudo clickhouse start ``` There are also another ways to run ClickHouse: ``` bash $ sudo service clickhouse-server start ``` If you do not have `service` command, run as ``` bash $ sudo /etc/init.d/clickhouse-server start ``` If you have `systemctl` command, run as ``` bash $ sudo systemctl start clickhouse-server.service ``` See the logs in the `/var/log/clickhouse-server/` directory. If the server does not start, check the configurations in the file `/etc/clickhouse-server/config.xml`. You can also manually launch the server from the console: ``` bash $ clickhouse-server --config-file=/etc/clickhouse-server/config.xml ``` In this case, the log will be printed to the console, which is convenient during development. If the configuration file is in the current directory, you do not need to specify the `--config-file` parameter. By default, it uses `./config.xml`. ClickHouse supports access restriction settings. They are located in the `users.xml` file (next to `config.xml`). By default, access is allowed from anywhere for the `default` user, without a password. See `user/default/networks`. For more information, see the section [“Configuration Files”](../operations/configuration-files.md). After launching server, you can use the command-line client to connect to it: ``` bash $ clickhouse-client ``` By default, it connects to `localhost:9000` on behalf of the user `default` without a password. It can also be used to connect to a remote server using `--host` argument. The terminal must use UTF-8 encoding. For more information, see the section [“Command-line client”](../interfaces/cli.md). Example: ``` $ ./clickhouse-client ClickHouse client version 0.0.18749. Connecting to localhost:9000. Connected to ClickHouse server version 0.0.18749. :) SELECT 1 SELECT 1 ┌─1─┐ │ 1 │ └───┘ 1 rows in set. Elapsed: 0.003 sec. :) ``` **Congratulations, the system works!** To continue experimenting, you can download one of the test data sets or go through [tutorial](./../tutorial.md). [Original article](https://clickhouse.com/docs/en/getting_started/install/)