thevar1able/ClickHouse
1
0
Fork 0
mirror of https://github.com/ClickHouse/ClickHouse.git synced 2024-12-16 11:22:12 +00:00
Code Issues Packages Projects Releases Wiki Activity
adb46fa174
ClickHouse/contrib/jemalloc-cmake/CMakeLists.txt
Azat Khuzhin a10aa9ad50 Force libunwind usage (removes gcc_eh support) 
libunwind is reentrant and signal safe, and works faster then then
gcc_eh (plus it has some custom patches for problems that have been
found during it's usage in ClickHouse).

gcc_eh may be missing in the system (if gcc was not installed), and
even if it exists clickhouse uses -nodefaultlibs, so some care should be
made to make it work.

Also this library is tiny and there shouln't be any problem to require
it always (there is already tendency to require some contrib libraries,
i.e. poco).

Signed-off-by: Azat Khuzhin <a.khuzhin@semrush.com>
2023-07-08 20:55:50 +02:00

185 lines
7.1 KiB
CMake
Raw Blame History

if (SANITIZE OR NOT (
((OS_LINUX OR OS_FREEBSD) AND (ARCH_AMD64 OR ARCH_AARCH64 OR ARCH_PPC64LE OR ARCH_RISCV64)) OR
(OS_DARWIN AND (CMAKE_BUILD_TYPE_UC STREQUAL "RELWITHDEBINFO" OR CMAKE_BUILD_TYPE_UC STREQUAL "DEBUG"))
))
if (ENABLE_JEMALLOC)
message (${RECONFIGURE_MESSAGE_LEVEL}
"jemalloc is disabled implicitly: it doesn't work with sanitizers and can only be used with x86_64, aarch64, or ppc64le Linux or FreeBSD builds and RelWithDebInfo macOS builds. Use -DENABLE_JEMALLOC=0")
endif ()
set (ENABLE_JEMALLOC OFF)
else ()
option (ENABLE_JEMALLOC "Enable jemalloc allocator" ${ENABLE_LIBRARIES})
endif ()
if (NOT ENABLE_JEMALLOC)
message (STATUS "Not using jemalloc")
return()
endif ()
if (NOT OS_LINUX)
message (WARNING "jemalloc support on non-linux is EXPERIMENTAL")
endif()
if (OS_LINUX)
# ThreadPool select job randomly, and there can be some threads that had been
# performed some memory heavy task before and will be inactive for some time,
# but until it will became active again, the memory will not be freed since by
# default each thread has it's own arena, but there should be not more then
# 4*CPU arenas (see opt.nareans description).
#
# By enabling percpu_arena number of arenas limited to number of CPUs and hence
# this problem should go away.
#
# muzzy_decay_ms -- use MADV_FREE when available on newer Linuxes, to
# avoid spurious latencies and additional work associated with
# MADV_DONTNEED. See
# https://github.com/ClickHouse/ClickHouse/issues/11121 for motivation.
set (JEMALLOC_CONFIG_MALLOC_CONF "percpu_arena:percpu,oversize_threshold:0,muzzy_decay_ms:5000,dirty_decay_ms:5000")
else()
set (JEMALLOC_CONFIG_MALLOC_CONF "oversize_threshold:0,muzzy_decay_ms:5000,dirty_decay_ms:5000")
endif()
# CACHE variable is empty, to allow changing defaults without necessity
# to purge cache
set (JEMALLOC_CONFIG_MALLOC_CONF_OVERRIDE "" CACHE STRING "Change default configuration string of JEMalloc" )
if (JEMALLOC_CONFIG_MALLOC_CONF_OVERRIDE)
set (JEMALLOC_CONFIG_MALLOC_CONF "${JEMALLOC_CONFIG_MALLOC_CONF_OVERRIDE}")
endif()
message (STATUS "jemalloc malloc_conf: ${JEMALLOC_CONFIG_MALLOC_CONF}")
set (LIBRARY_DIR "${ClickHouse_SOURCE_DIR}/contrib/jemalloc")
set (SRCS
"${LIBRARY_DIR}/src/arena.c"
"${LIBRARY_DIR}/src/background_thread.c"
"${LIBRARY_DIR}/src/base.c"
"${LIBRARY_DIR}/src/bin.c"
"${LIBRARY_DIR}/src/bin_info.c"
"${LIBRARY_DIR}/src/bitmap.c"
"${LIBRARY_DIR}/src/buf_writer.c"
"${LIBRARY_DIR}/src/cache_bin.c"
"${LIBRARY_DIR}/src/ckh.c"
"${LIBRARY_DIR}/src/counter.c"
"${LIBRARY_DIR}/src/ctl.c"
"${LIBRARY_DIR}/src/decay.c"
"${LIBRARY_DIR}/src/div.c"
"${LIBRARY_DIR}/src/ecache.c"
"${LIBRARY_DIR}/src/edata.c"
"${LIBRARY_DIR}/src/edata_cache.c"
"${LIBRARY_DIR}/src/ehooks.c"
"${LIBRARY_DIR}/src/emap.c"
"${LIBRARY_DIR}/src/eset.c"
"${LIBRARY_DIR}/src/exp_grow.c"
"${LIBRARY_DIR}/src/extent.c"
"${LIBRARY_DIR}/src/extent_dss.c"
"${LIBRARY_DIR}/src/extent_mmap.c"
"${LIBRARY_DIR}/src/fxp.c"
"${LIBRARY_DIR}/src/hook.c"
"${LIBRARY_DIR}/src/hpa.c"
"${LIBRARY_DIR}/src/hpa_hooks.c"
"${LIBRARY_DIR}/src/hpdata.c"
"${LIBRARY_DIR}/src/inspect.c"
"${LIBRARY_DIR}/src/jemalloc.c"
"${LIBRARY_DIR}/src/large.c"
"${LIBRARY_DIR}/src/log.c"
"${LIBRARY_DIR}/src/malloc_io.c"
"${LIBRARY_DIR}/src/mutex.c"
"${LIBRARY_DIR}/src/nstime.c"
"${LIBRARY_DIR}/src/pa.c"
"${LIBRARY_DIR}/src/pac.c"
"${LIBRARY_DIR}/src/pa_extra.c"
"${LIBRARY_DIR}/src/pages.c"
"${LIBRARY_DIR}/src/pai.c"
"${LIBRARY_DIR}/src/peak_event.c"
"${LIBRARY_DIR}/src/prof.c"
"${LIBRARY_DIR}/src/prof_data.c"
"${LIBRARY_DIR}/src/prof_log.c"
"${LIBRARY_DIR}/src/prof_recent.c"
"${LIBRARY_DIR}/src/prof_stats.c"
"${LIBRARY_DIR}/src/prof_sys.c"
"${LIBRARY_DIR}/src/psset.c"
"${LIBRARY_DIR}/src/rtree.c"
"${LIBRARY_DIR}/src/safety_check.c"
"${LIBRARY_DIR}/src/san_bump.c"
"${LIBRARY_DIR}/src/san.c"
"${LIBRARY_DIR}/src/sc.c"
"${LIBRARY_DIR}/src/sec.c"
"${LIBRARY_DIR}/src/stats.c"
"${LIBRARY_DIR}/src/sz.c"
"${LIBRARY_DIR}/src/tcache.c"
"${LIBRARY_DIR}/src/test_hooks.c"
"${LIBRARY_DIR}/src/thread_event.c"
"${LIBRARY_DIR}/src/ticker.c"
"${LIBRARY_DIR}/src/tsd.c"
"${LIBRARY_DIR}/src/witness.c"
)
if (OS_DARWIN)
list(APPEND SRCS "${LIBRARY_DIR}/src/zone.c")
endif ()
add_library(_jemalloc ${SRCS})
# First include jemalloc-cmake files, to override anything that jemalloc has.
# (for example if you were trying to build jemalloc inside contrib/jemalloc you
# will have some files that may be out of date)
target_include_directories(_jemalloc SYSTEM PUBLIC include)
target_include_directories(_jemalloc PRIVATE "${LIBRARY_DIR}/include")
set (JEMALLOC_INCLUDE_PREFIX)
# OS_
if (OS_LINUX)
set (JEMALLOC_INCLUDE_PREFIX "include_linux")
elseif (OS_FREEBSD)
set (JEMALLOC_INCLUDE_PREFIX "include_freebsd")
elseif (OS_DARWIN)
set (JEMALLOC_INCLUDE_PREFIX "include_darwin")
else ()
message (FATAL_ERROR "internal jemalloc: This OS is not supported")
endif ()
# ARCH_
if (ARCH_AMD64)
if (USE_MUSL)
set(JEMALLOC_INCLUDE_PREFIX "${JEMALLOC_INCLUDE_PREFIX}_x86_64_musl")
else()
set(JEMALLOC_INCLUDE_PREFIX "${JEMALLOC_INCLUDE_PREFIX}_x86_64")
endif()
elseif (ARCH_AARCH64)
set(JEMALLOC_INCLUDE_PREFIX "${JEMALLOC_INCLUDE_PREFIX}_aarch64")
elseif (ARCH_PPC64LE)
set(JEMALLOC_INCLUDE_PREFIX "${JEMALLOC_INCLUDE_PREFIX}_ppc64le")
elseif (ARCH_RISCV64)
set(JEMALLOC_INCLUDE_PREFIX "${JEMALLOC_INCLUDE_PREFIX}_riscv64")
else ()
message (FATAL_ERROR "internal jemalloc: This arch is not supported")
endif ()
configure_file(${JEMALLOC_INCLUDE_PREFIX}/jemalloc/internal/jemalloc_internal_defs.h.in
${JEMALLOC_INCLUDE_PREFIX}/jemalloc/internal/jemalloc_internal_defs.h)
target_include_directories(_jemalloc SYSTEM PRIVATE
"${CMAKE_CURRENT_BINARY_DIR}/${JEMALLOC_INCLUDE_PREFIX}/jemalloc/internal")
target_compile_definitions(_jemalloc PRIVATE -DJEMALLOC_NO_PRIVATE_NAMESPACE)
if (CMAKE_BUILD_TYPE_UC STREQUAL "DEBUG")
target_compile_definitions(_jemalloc PRIVATE
-DJEMALLOC_DEBUG=1
# Usage examples:
# - MALLOC_CONF=log:.
# - MALLOC_CONF='log:core.malloc.exit|core.sallocx.entry|core.sdallocx.entry'
-DJEMALLOC_LOG=1)
endif ()
target_compile_definitions(_jemalloc PRIVATE -DJEMALLOC_PROF=1)
# jemalloc provides support for two different libunwind flavors: the original HP libunwind and the one coming with gcc / g++ / libstdc++.
# The latter is identified by `JEMALLOC_PROF_LIBGCC` and uses `_Unwind_Backtrace` method instead of `unw_backtrace`.
# At the time ClickHouse uses LLVM libunwind which follows libgcc's way of backtracing.
#
# ClickHouse has to provide `unw_backtrace` method by the means of [commit 8e2b31e](https://github.com/ClickHouse/libunwind/commit/8e2b31e766dd502f6df74909e04a7dbdf5182eb1).
target_compile_definitions (_jemalloc PRIVATE -DJEMALLOC_PROF_LIBGCC=1)
target_link_libraries (_jemalloc PRIVATE unwind)
# for RTLD_NEXT
target_compile_options(_jemalloc PRIVATE -D_GNU_SOURCE)
add_library(ch_contrib::jemalloc ALIAS _jemalloc)
Reference in New Issue View Git Blame Copy Permalink