Commit Graph

91 Commits

Author SHA1 Message Date
Alexey Milovidov
47b308d234 Simplify bridges 2024-03-09 08:42:33 +01:00
Maksim Kita
2a327107b6 Updated implementation 2024-01-25 14:31:49 +03:00
Yakov Olkhovskiy
feab812712 read body of HTTP POST request to prevent 'connection reset by peer' error on client side 2024-01-07 14:40:12 +00:00
Yakov Olkhovskiy
85f03478ef
Revert "Revert "Use CH Buffer for HTTP out stream, add metrics for interfaces"" 2024-01-03 11:47:15 -05:00
Raúl Marín
d491758939
Revert "Use CH Buffer for HTTP out stream, add metrics for interfaces" 2024-01-03 10:42:15 +01:00
Yakov Olkhovskiy
db97764e98 fix tests, some refactoring 2023-12-31 12:56:37 +00:00
Yakov Olkhovskiy
001a38048f use ProfileEvents instead of CurrentMetrics 2023-12-15 19:17:42 +00:00
Yakov Olkhovskiy
4f11132ea2 fix clang tidy 2023-11-04 00:00:14 +00:00
Yakov Olkhovskiy
0cf851316c use CH Buffer for HTTP out stream, add metrics for interfaces 2023-10-27 02:38:36 +00:00
Alexey Milovidov
d3c3d8b8e4 Remove export of dynamic symbols 2023-05-06 23:52:16 +02:00
alex filatov
bafd9773bc
fix Unknown library method 'extDict_libClone'
We have an issue when using external dictionary. Occasionally library bridge called with extDict_libClone and fails with Unknown library method 'extDict_libClone'. And it looks like it is because of at some point `else if (method == "extDict_libNew")` was changed to  if (lib_new) with no handling for extDict_libClone inside this new if else statement and reporing an error that extDict_libClone is an unknown method.

So there is a two-line fix to handle extDict_libClone properly.

Error logs that we have:

```
2022.12.16 14:17:44.285088 [ 393573 ] {} <Error> ExternalDictionaries: Could not update cache dictionary 'dict.vhash_s', next update is scheduled at 2022-12-16 14:18:00: Code: 86. DB::Exception: Received error from remote server /extdict_request?version=1&dictionary_id=be2b2cd1-ba57-4658-8d1b-35ef40ab005b&method=extDict_libClone&from_dictionary_id=c3537142-eaa9-4deb-9b65-47eb8ea1dee6. HTTP status code: 500 Internal Server Error, body: Unknown library method 'extDict_libClone'
2022.12.16 14:17:44.387049 [ 399133 ] {} <Error> ExternalDictionaries: Could not update cache dictionary 'dict.vhash_s', next update is scheduled at 2022-12-16 14:17:51: Code: 86. DB::Exception: Received error from remote server /extdict_request?version=1&dictionary_id=0df866ac-6c94-4974-a76c-3940522091b9&method=extDict_libClone&from_dictionary_id=c3537142-eaa9-4deb-9b65-47eb8ea1dee6. HTTP status code: 500 Internal Server Error, body: Unknown library method 'extDict_libClone'
2022.12.16 14:17:44.488468 [ 397769 ] {} <Error> ExternalDictionaries: Could not update cache dictionary 'dict.vhash_s', next update is scheduled at 2022-12-16 14:19:38: Code: 86. DB::Exception: Received error from remote server /extdict_request?version=1&dictionary_id=2d8af321-b669-4526-982b-42c0fabf0e8d&method=extDict_libClone&from_dictionary_id=c3537142-eaa9-4deb-9b65-47eb8ea1dee6. HTTP status code: 500 Internal Server Error, body: Unknown library method 'extDict_libClone'
2022.12.16 14:17:44.489935 [ 398226 ] {datamarts_v_dwh_node0032-241534:0x552da2_1_11} <Error> executeQuery: Code: 510. DB::Exception: Update failed for dictionary 'dict.vhash_s': Code: 510. DB::Exception: Update failed for dictionary dict.vhash_s : Code: 86. DB::Exception: Received error from remote server /extdict_request?version=1&dictionary_id=be2b2cd1-ba57-4658-8d1b-35ef40ab005b&method=extDict_libClone&from_dictionary_id=c3537142-eaa9-4deb-9b65-47eb8ea1dee6. HTTP status code: 500 Internal Server Error, body: Unknown library method 'extDict_libClone'
```
2023-03-02 15:53:09 +03:00
Alexander Tokmakov
31e16c4b4d fix 2023-01-24 15:29:19 +01:00
Alexander Tokmakov
70d1adfe4b
Better formatting for exception messages (#45449)
* save format string for NetException

* format exceptions

* format exceptions 2

* format exceptions 3

* format exceptions 4

* format exceptions 5

* format exceptions 6

* fix

* format exceptions 7

* format exceptions 8

* Update MergeTreeIndexGin.cpp

* Update AggregateFunctionMap.cpp

* Update AggregateFunctionMap.cpp

* fix
2023-01-24 00:13:58 +03:00
Robert Schulze
9c066e964d
Less use of CH-specific bit_cast()
Converted usage of CH-custom bit_cast to std::bit_cast if possible, i.e.
when
  sizeof(From) == sizeof(To).
(The CH-custom bit_cast is able to deal with sizeof(From) != sizeof(To).)

Motivation for this came from #42847 where it is not clear how the
internal bit_cast should behave on big endian systems, so we better
avoid that situation as much as possible.
2022-11-04 15:52:48 +00:00
Alexey Milovidov
bac578b23a
Merge pull request #41428 from ClickHouse/remove-dlopen
Remove `dlopen`
2022-09-18 00:09:57 +03:00
Alexey Milovidov
ada7a44ae4 Remove -WithTerminatingZero methods 2022-09-17 05:34:18 +02:00
Alexey Milovidov
35cce03125 Remove dlopen 2022-09-17 03:02:34 +02:00
Robert Schulze
fd97058e45
fix: incorporate review comments 2022-09-14 15:21:24 +00:00
Robert Schulze
fac1be9700
chore: restore SYSTEM RELOAD MODEL(S) and moniting view SYSTEM.MODELS
- This commit restores statements "SYSTEM RELOAD MODEL(S)" which provide
  a mechanism to update a model explicitly. It also saves potentially
  unnecessary reloads of a model from disk after it's initial load.

  To keep the complexity low, the semantics of "SYSTEM RELOAD MODEL(S)
  was changed from eager to lazy. This means that both statements
  previously immedately reloaded the specified/all models, whereas now
  the statements only trigger an unload and the first call to
  catboostEvaluate() does the actual load.

- Monitoring view SYSTEM.MODELS is also restored but with some obsolete
  fields removed. The view was not documented in the past and for now it
  remains undocumented. The commit is thus not considered a breach of
  ClickHouse's public interface.
2022-09-12 19:33:02 +00:00
Robert Schulze
60f9f6855d
feat: implement catboost in library-bridge
This commit moves the catboost model evaluation out of the server
process into the library-bridge binary. This serves two goals: On the
one hand, crashes / memory corruptions of the catboost library no longer
affect the server. On the other hand, we can forbid loading dynamic
libraries in the server (catboost was the last consumer of this
functionality), thus improving security.

SQL syntax:

  SELECT
    catboostEvaluate('/path/to/model.bin', FEAT_1, ..., FEAT_N) > 0 AS prediction,
    ACTION AS target
  FROM amazon_train
  LIMIT 10

Required configuration:

  <catboost_lib_path>/path/to/libcatboostmodel.so</catboost_lib_path>

*** Implementation Details ***

The internal protocol between the server and the library-bridge is
simple:

- HTTP GET on path "/extdict_ping":
  A ping, used during the handshake to check if the library-bridge runs.

- HTTP POST on path "extdict_request"
  (1) Send a "catboost_GetTreeCount" request from the server to the
      bridge, containing a library path (e.g /home/user/libcatboost.so) and
      a model path (e.g. /home/user/model.bin). Rirst, this unloads the
      catboost library handler associated to the model path (if it was
      loaded), then loads the catboost library handler associated to the
      model path, then executes GetTreeCount() on the library handler and
      finally sends the result back to the server. Step (1) is called once
      by the server from FunctionCatBoostEvaluate::getReturnTypeImpl(). The
      library path handler is unloaded in the beginning because it contains
      state which may no longer be valid if the user runs
      catboost("/path/to/model.bin", ...) more than once and if "model.bin"
      was updated in between.
  (2) Send "catboost_Evaluate" from the server to the bridge, containing
      the model path and the features to run the interference on. Step (2)
      is called multiple times (once per chunk) by the server from function
      FunctionCatBoostEvaluate::executeImpl(). The library handler for the
      given model path is expected to be already loaded by Step (1).

Fixes #27870
2022-09-08 09:01:32 +00:00
Robert Schulze
912663b719
Revert "Move CatBoost evaluation into clickhouse-library-bridge" 2022-08-31 20:54:43 +02:00
Robert Schulze
4ed1e1a5be
perf: don't copy data around unnecessarily 2022-08-29 20:27:06 +00:00
Robert Schulze
35a37c91f8
chore: incorporate review feedback 2022-08-29 20:27:06 +00:00
robot-clickhouse
64fa077148
style: fix style 2022-08-29 20:27:06 +00:00
Robert Schulze
6b2b3c1eb3
feat: implement catboost in library-bridge
This commit moves the catboost model evaluation out of the server
process into the library-bridge binary. This serves two goals: On the
one hand, crashes / memory corruptions of the catboost library no longer
affect the server. On the other hand, we can forbid loading dynamic
libraries in the server (catboost was the last consumer of this
functionality), thus improving security.

SQL syntax:

  SELECT
    catboostEvaluate('/path/to/model.bin', FEAT_1, ..., FEAT_N) > 0 AS prediction,
    ACTION AS target
  FROM amazon_train
  LIMIT 10

Required configuration:

  <catboost_lib_path>/path/to/libcatboostmodel.so</catboost_lib_path>

*** Implementation Details ***

The internal protocol between the server and the library-bridge is
simple:

- HTTP GET on path "/extdict_ping":
  A ping, used during the handshake to check if the library-bridge runs.

- HTTP POST on path "extdict_request"
  (1) Send a "catboost_GetTreeCount" request from the server to the
      bridge, containing a library path (e.g /home/user/libcatboost.so) and
      a model path (e.g. /home/user/model.bin). Rirst, this unloads the
      catboost library handler associated to the model path (if it was
      loaded), then loads the catboost library handler associated to the
      model path, then executes GetTreeCount() on the library handler and
      finally sends the result back to the server. Step (1) is called once
      by the server from FunctionCatBoostEvaluate::getReturnTypeImpl(). The
      library path handler is unloaded in the beginning because it contains
      state which may no longer be valid if the user runs
      catboost("/path/to/model.bin", ...) more than once and if "model.bin"
      was updated in between.
  (2) Send "catboost_Evaluate" from the server to the bridge, containing
      the model path and the features to run the interference on. Step (2)
      is called multiple times (once per chunk) by the server from function
      FunctionCatBoostEvaluate::executeImpl(). The library handler for the
      given model path is expected to be already loaded by Step (1).

Fixes #27870
2022-08-29 20:26:45 +00:00
Robert Schulze
810221baf2
Assume unversioned server has version=0 and use tryParse() instead of from_chars() 2022-08-10 07:39:32 +00:00
Robert Schulze
e0d5020a92
Add simple versioning to the *-bridge-to-server protocol
- In general, it is expected that clickhouse-*-bridges and
  clickhouse-server were build from the same source version (e.g. are
  upgraded "atomically"). If that is not the case, we should at least
  be able to detect the mismatch and abort.

- This commit adds a URL parameter "version", defined in a header shared
  by the server and bridges. The bridge returns an error in case of
  mismatch.

- The version is *not* send and checked for "ping" requests (used for
  handshake), only for regular requests send after handshake. This is
  because the internally thrown server-side exception due to HTTP
  failure does not propagate the exact HTTP error (it only stores the
  error as text), and as a result, the server-side handshake code
  simply retries in case of error with exponential backoff and finally
  fails with a "timeout error". This is reasonable as pings typically
  fail due to time out. However, without a rework of HTTP exceptions,
  version mismatch during ping would also appear as "timeout" which is
  too misleading. The behavior may be changed later if needed.

- Note that introducing a version parameter does not represent a
  protocol upgrade itself. Bridges older than the server will simply
  ignore the field. Only servers older than the bridges receive an error
  but such a situation should never occur in practice.
2022-08-08 19:40:37 +00:00
Robert Schulze
9952ab1099
Prefix class names "LibraryBridge*Handler" with "ExternalDictionary"
- necessary to disambiguate the names from "CatBoost"-"LibraryBridgeHandler"
  which will be added in a next step
2022-08-08 17:16:46 +00:00
Robert Schulze
20bb8a248e
Prepare server-side BridgeHelper for catboost integration
Wall of text, sorry, but I also had to document some stuff for myself:

There are three ways to communicate data using HTTP:
- the HTTP verb: for our purposes, PUT and GET,
- the HTTP path: '/ping', '/request' etc.,
- the HTTP URL parameter(s), e.g. 'method=libNew&dictionary_id=1234'

The bridge will use different handlers for communication with the
external dictionary library and for communication with the catboost
library. Handlers are created based on a combination of the HTTP verb
and the HTTP method. More specifically, there will be combinations
- GET + '/extdict_ping'
- PUT + '/extdict_request'
- GET + '/catboost_ping'
- PUT + '/catboost_request'.
For each combination, the bridge expects a certain set of URL
parameters, e.g. for the first combination parameter "dictionary_id" is
expected.

Starting with this commit, the library-bridge creates handlers based on
the first two combinations (the latter two combinations will be added
later). This makes the handler creation mechanism consistent with it's
counterpart in xdbc-bridge.

For that, it was necessary to make both IBridgeHelper methods
"getMainURI()" and "getPingURI()" pure virtual so that derived classes
(LibraryBridgeHelper and XDBCBridgeHelper) must provide custom URLs with
custom paths.

Side note 1: Previously, LibraryBridgeHelper sent HTTP URL parameter
"method=ping" during handshake (PING) but the library-bridge ignored
that parameter. We now omit this parameter, i.e.
LibraryBridgeHelper::PING was removed. Again, this makes things
consistent with xdbc-bridge.

Side note 2: xdbc-bridge is unchanged in this commit. Therefore,
XDBCBridgeHelper now uses the HTTP paths previously in the base class.
For funny reason, XDBCBridgeHelper did not use
IBridgeHelper::getMainURI() - it generates the URLs by itself. I kept it
that way for now but provided an implementation of getMainURI() anyways.
2022-08-04 19:29:51 +00:00
Robert Schulze
ea73b98fb9
Prepare library-bridge for catboost integration
- Rename generic file and identifier names in library-bridge to
  something more dictionary-specific. This is needed because later on,
  catboost will be integrated into library-bridge.

- Also: Some smaller fixes like typos and un-inlining non-performance
  critical code.

- The logic remains unchanged in this commit.
2022-08-04 19:26:51 +00:00
Robert Schulze
1a7727a254
Prefix overridden add_executable() command with "clickhouse_"
A simple HelloWorld program with zero includes except iostream triggers
a build of ca. 2000 source files. The reason is that ClickHouse's
top-level CMakeLists.txt overrides "add_executable()" to link all
binaries against "clickhouse_new_delete". This links against
"clickhouse_common_io", which in turn has lots of 3rd party library
dependencies ... Without linking "clickhouse_new_delete", the number of
compiled files for "HelloWorld" goes down to ca. 70.

As an example, the self-extracting-executable needs none of its current
dependencies but other programs may also benefit.

In order to restore access to the original "add_executable()", the
overriding version is now prefixed. There is precedence for a
"clickhouse_" prefix (as opposed to "ch_"), for example
"clickhouse_split_debug_symbols". In general prefixing makes sense also
because overriding CMake commands relies on undocumented behavior and is
considered not-so-great practice (*).

(*) https://crascit.com/2018/09/14/do-not-redefine-cmake-commands/
2022-07-11 19:36:18 +02:00
Robert Schulze
bb358617e1
Better naming for stuff related to splitted debug symbols
The previous name was slightly misleading, e.g. it is not about
"intalling stripped binaries" but about splitting debug symbols from the
binary.
2022-06-30 23:41:27 +02:00
Robert Schulze
5a4f21c50f
Support for Clang Thread Safety Analysis (TSA)
- TSA is a static analyzer build by Google which finds race conditions
  and deadlocks at compile time.

- It works by associating a shared member variable with a
  synchronization primitive that protects it. The compiler can then
  check at each access if proper locking happened before. A good
  introduction are [0] and [1].

- TSA requires some help by the programmer via annotations. Luckily,
  LLVM's libcxx already has annotations for std::mutex, std::lock_guard,
  std::shared_mutex and std::scoped_lock. This commit enables them
  (--> contrib/libcxx-cmake/CMakeLists.txt).

- Further, this commit adds convenience macros for the low-level
  annotations for use in ClickHouse (--> base/defines.h). For
  demonstration, they are leveraged in a few places.

- As we compile with "-Wall -Wextra -Weverything", the required compiler
  flag "-Wthread-safety-analysis" was already enabled. Negative checks
  are an experimental feature of TSA and disabled
  (--> cmake/warnings.cmake). Compile times did not increase noticeably.

- TSA is used in a few places with simple locking. I tried TSA also
  where locking is more complex. The problem was usually that it is
  unclear which data is protected by which lock :-(. But there was
  definitely some weird code where locking looked broken. So there is
  some potential to find bugs.

*** Limitations of TSA besides the ones listed in [1]:

- The programmer needs to know which lock protects which piece of shared
  data. This is not always easy for large classes.

- Two synchronization primitives used in ClickHouse are not annotated in
  libcxx:
  (1) std::unique_lock: A releaseable lock handle often together with
      std::condition_variable, e.g. in solve producer-consumer problems.
  (2) std::recursive_mutex: A re-entrant mutex variant. Its usage can be
      considered a design flaw + typically it is slower than a standard
      mutex. In this commit, one std::recursive_mutex was converted to
      std::mutex and annotated with TSA.

- For free-standing functions (e.g. helper functions) which are passed
  shared data members, it can be tricky to specify the associated lock.
  This is because the annotations use the normal C++ rules for symbol
  resolution.

[0] https://clang.llvm.org/docs/ThreadSafetyAnalysis.html
[1] https://static.googleusercontent.com/media/research.google.com/en//pubs/archive/42958.pdf
2022-06-20 16:13:25 +02:00
Amos Bird
4a5e4274f0
base should not depend on Common 2022-04-29 10:26:35 +08:00
Robert Schulze
118e94523c
Activate clang-tidy warning "readability-container-contains"
This check suggests replacing <Container>.count() by
<Container>.contains() which is more speaking and in case of
multimaps/multisets also faster.
2022-04-18 23:53:11 +02:00
alesapin
e790a73081 Simplify strip for new packages 2022-03-23 15:14:30 +01:00
Mikhail f. Shiryaev
1d362796df
Fix strip bug 2022-03-22 11:10:02 +01:00
Mikhail f. Shiryaev
fa2a9bb9aa
Separate BUILD_STRIPPED_BINARIES_PREFIX to option and parameter 2022-03-22 11:10:02 +01:00
alesapin
e53578910b Add ability to strip binaries in cmake 2022-03-10 22:23:28 +01:00
Azat Khuzhin
3b3635c6d5 Fix formatting error in logging messages
Signed-off-by: Azat Khuzhin <a.khuzhin@semrush.com>
2022-02-01 14:30:04 +03:00
Azat Khuzhin
bedf208cbd Use fmt::runtime() for LOG_* for non constexpr
Here is oneliner:

    $ gg 'LOG_\(DEBUG\|TRACE\|INFO\|TEST\|WARNING\|ERROR\|FATAL\)([^,]*, [a-zA-Z]' -- :*.cpp :*.h | cut -d: -f1 | sort -u | xargs -r sed -E -i 's#(LOG_[A-Z]*)\(([^,]*), ([A-Za-z][^,)]*)#\1(\2, fmt::runtime(\3)#'

Note, that I tried to do this with coccinelle (tool for semantic
patchin), but it cannot parse C++:

    $ cat fmt.cocci
    @@
    expression log;
    expression var;
    @@

    -LOG_DEBUG(log, var)
    +LOG_DEBUG(log, fmt::runtime(var))

I've also tried to use some macros/templates magic to do this implicitly
in logger_useful.h, but I failed to do so, and apparently it is not
possible for now.

Signed-off-by: Azat Khuzhin <a.khuzhin@semrush.com>

v2: manual fixes
Signed-off-by: Azat Khuzhin <a.khuzhin@semrush.com>
2022-02-01 14:30:03 +03:00
Nikolai Kochetov
a08c98d760 Move some files. 2021-10-16 17:03:50 +03:00
Nikolai Kochetov
ab28c6c855 Remove BlockInputStream interfaces. 2021-10-14 13:25:43 +03:00
Nikolai Kochetov
ec18340351 Remove streams from formats. 2021-10-11 19:11:50 +03:00
Alexey Milovidov
fe6b7c77c7 Rename "common" to "base" 2021-10-02 10:13:14 +03:00
kssenii
294695bb7d Review fixes 2021-08-02 13:40:58 +00:00
kssenii
9c6a8b0059 Restore previous ids passing 2021-08-01 08:59:19 +00:00
kssenii
130253e3b9 Fix bridge-server interaction in case of metadata inconsistency 2021-08-01 08:59:16 +00:00
Raúl Marín
2442216472 Fix style too 2021-07-28 11:39:53 +02:00
kssenii
3fe5e8d1ce Fix 2021-07-28 08:30:58 +00:00