ClickHouse/docs/en/getting-started/install.md
Ilya Strukov dff8c0e4f0
Fix a tiny wording issue
Replace "there are another ways" with "there are other ways"
2022-05-22 12:19:18 +02:00

12 KiB
Raw Blame History

sidebar_label sidebar_position keywords description slug
Installation 1
clickhouse
install
installation
docs
ClickHouse can run on any Linux, FreeBSD, or Mac OS X with x86_64, AArch64, or PowerPC64LE CPU architecture. /en/getting-started/install

Installation

System Requirements

ClickHouse can run on any Linux, FreeBSD, or Mac OS X with x86_64, AArch64, or PowerPC64LE CPU architecture.

Official pre-built binaries are typically compiled for x86_64 and leverage SSE 4.2 instruction set, so unless otherwise stated usage of CPU that supports it becomes an additional system requirement. Heres the command to check if current CPU has support for SSE 4.2:

$ grep -q sse4_2 /proc/cpuinfo && echo "SSE 4.2 supported" || echo "SSE 4.2 not supported"

To run ClickHouse on processors that do not support SSE 4.2 or have AArch64 or PowerPC64LE architecture, you should build ClickHouse from sources with proper configuration adjustments.

Available Installation Options

From DEB Packages

It is recommended to use official pre-compiled deb packages for Debian or Ubuntu. Run these commands to install packages:

sudo apt-get install -y apt-transport-https ca-certificates dirmngr
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 8919F6BD2B48D754

echo "deb https://packages.clickhouse.com/deb stable main" | sudo tee \
    /etc/apt/sources.list.d/clickhouse.list
sudo apt-get update

sudo apt-get install -y clickhouse-server clickhouse-client

sudo service clickhouse-server start
clickhouse-client # or "clickhouse-client --password" if you've set up a password.
Deprecated Method for installing deb-packages
sudo apt-get install apt-transport-https ca-certificates dirmngr
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv E0C56BD4

echo "deb https://repo.clickhouse.com/deb/stable/ main/" | sudo tee \
    /etc/apt/sources.list.d/clickhouse.list
sudo apt-get update

sudo apt-get install -y clickhouse-server clickhouse-client

sudo service clickhouse-server start
clickhouse-client # or "clickhouse-client --password" if you set up a password.

You can replace stable with lts or testing to use different release trains based on your needs.

You can also download and install packages manually from here.

Packages

  • clickhouse-common-static — Installs ClickHouse compiled binary files.
  • clickhouse-server — Creates a symbolic link for clickhouse-server and installs the default server configuration.
  • clickhouse-client — Creates a symbolic link for clickhouse-client and other client-related tools. and installs client configuration files.
  • clickhouse-common-static-dbg — Installs ClickHouse compiled binary files with debug info.

:::info
If you need to install specific version of ClickHouse you have to install all packages with the same version: sudo apt-get install clickhouse-server=21.8.5.7 clickhouse-client=21.8.5.7 clickhouse-common-static=21.8.5.7 :::

From RPM Packages

It is recommended to use official pre-compiled rpm packages for CentOS, RedHat, and all other rpm-based Linux distributions.

First, you need to add the official repository:

sudo yum install -y yum-utils
sudo yum-config-manager --add-repo https://packages.clickhouse.com/rpm/clickhouse.repo
sudo yum install -y clickhouse-server clickhouse-client

sudo /etc/init.d/clickhouse-server start
clickhouse-client # or "clickhouse-client --password" if you set up a password.
Deprecated Method for installing rpm-packages
sudo yum install yum-utils
sudo rpm --import https://repo.clickhouse.com/CLICKHOUSE-KEY.GPG
sudo yum-config-manager --add-repo https://repo.clickhouse.com/rpm/clickhouse.repo
sudo yum install clickhouse-server clickhouse-client

sudo /etc/init.d/clickhouse-server start
clickhouse-client # or "clickhouse-client --password" if you set up a password.

If you want to use the most recent version, replace stable with testing (this is recommended for your testing environments). prestable is sometimes also available.

Then run these commands to install packages:

sudo yum install clickhouse-server clickhouse-client

You can also download and install packages manually from here.

From Tgz Archives

It is recommended to use official pre-compiled tgz archives for all Linux distributions, where installation of deb or rpm packages is not possible.

The required version can be downloaded with curl or wget from repository https://packages.clickhouse.com/tgz/. After that downloaded archives should be unpacked and installed with installation scripts. Example for the latest stable version:

LATEST_VERSION=$(curl -s https://packages.clickhouse.com/tgz/stable/ | \
    grep -Eo '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+' | sort -V -r | head -n 1)
export LATEST_VERSION
curl -O "https://packages.clickhouse.com/tgz/stable/clickhouse-common-static-$LATEST_VERSION-amd64.tgz"
curl -O "https://packages.clickhouse.com/tgz/stable/clickhouse-common-static-dbg-$LATEST_VERSION-amd64.tgz"
curl -O "https://packages.clickhouse.com/tgz/stable/clickhouse-server-$LATEST_VERSION-amd64.tgz"
curl -O "https://packages.clickhouse.com/tgz/stable/clickhouse-client-$LATEST_VERSION-amd64.tgz"

tar -xzvf "clickhouse-common-static-$LATEST_VERSION-amd64.tgz"
sudo "clickhouse-common-static-$LATEST_VERSION/install/doinst.sh"

tar -xzvf "clickhouse-common-static-dbg-$LATEST_VERSION-amd64.tgz"
sudo "clickhouse-common-static-dbg-$LATEST_VERSION/install/doinst.sh"

tar -xzvf "clickhouse-server-$LATEST_VERSION-amd64.tgz"
sudo "clickhouse-server-$LATEST_VERSION/install/doinst.sh"
sudo /etc/init.d/clickhouse-server start

tar -xzvf "clickhouse-client-$LATEST_VERSION-amd64.tgz"
sudo "clickhouse-client-$LATEST_VERSION/install/doinst.sh"
Deprecated Method for installing tgz archives
export LATEST_VERSION=$(curl -s https://repo.clickhouse.com/tgz/stable/ | \
    grep -Eo '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+' | sort -V -r | head -n 1)
curl -O https://repo.clickhouse.com/tgz/stable/clickhouse-common-static-$LATEST_VERSION.tgz
curl -O https://repo.clickhouse.com/tgz/stable/clickhouse-common-static-dbg-$LATEST_VERSION.tgz
curl -O https://repo.clickhouse.com/tgz/stable/clickhouse-server-$LATEST_VERSION.tgz
curl -O https://repo.clickhouse.com/tgz/stable/clickhouse-client-$LATEST_VERSION.tgz

tar -xzvf clickhouse-common-static-$LATEST_VERSION.tgz
sudo clickhouse-common-static-$LATEST_VERSION/install/doinst.sh

tar -xzvf clickhouse-common-static-dbg-$LATEST_VERSION.tgz
sudo clickhouse-common-static-dbg-$LATEST_VERSION/install/doinst.sh

tar -xzvf clickhouse-server-$LATEST_VERSION.tgz
sudo clickhouse-server-$LATEST_VERSION/install/doinst.sh
sudo /etc/init.d/clickhouse-server start

tar -xzvf clickhouse-client-$LATEST_VERSION.tgz
sudo clickhouse-client-$LATEST_VERSION/install/doinst.sh

For production environments, its recommended to use the latest stable-version. You can find its number on GitHub page https://github.com/ClickHouse/ClickHouse/tags with postfix -stable.

From Docker Image

To run ClickHouse inside Docker follow the guide on Docker Hub. Those images use official deb packages inside.

Single Binary

You can install ClickHouse on Linux using a single portable binary from the latest commit of the master branch: [https://builds.clickhouse.com/master/amd64/clickhouse].

curl -O 'https://builds.clickhouse.com/master/amd64/clickhouse' && chmod a+x clickhouse
sudo ./clickhouse install

From Precompiled Binaries for Non-Standard Environments

For non-Linux operating systems and for AArch64 CPU arhitecture, ClickHouse builds are provided as a cross-compiled binary from the latest commit of the master branch (with a few hours delay).

  • MacOS x86_64
    curl -O 'https://builds.clickhouse.com/master/macos/clickhouse' && chmod a+x ./clickhouse
    
  • MacOS Aarch64 (Apple Silicon)
    curl -O 'https://builds.clickhouse.com/master/macos-aarch64/clickhouse' && chmod a+x ./clickhouse
    
  • FreeBSD x86_64
    curl -O 'https://builds.clickhouse.com/master/freebsd/clickhouse' && chmod a+x ./clickhouse
    
  • Linux AArch64
    curl -O 'https://builds.clickhouse.com/master/aarch64/clickhouse' && chmod a+x ./clickhouse
    

Run sudo ./clickhouse install to install ClickHouse system-wide (also with needed configuration files, configuring users etc.). Then run clickhouse start commands to start the clickhouse-server and clickhouse-client to connect to it.

Use the clickhouse client to connect to the server, or clickhouse local to process local data.

From Sources

To manually compile ClickHouse, follow the instructions for Linux or Mac OS X.

You can compile packages and install them or use programs without installing packages. Also by building manually you can disable SSE 4.2 requirement or build for AArch64 CPUs.

  Client: programs/clickhouse-client
  Server: programs/clickhouse-server

Youll need to create a data and metadata folders and chown them for the desired user. Their paths can be changed in server config (src/programs/server/config.xml), by default they are:

  /var/lib/clickhouse/data/default/
  /var/lib/clickhouse/metadata/default/

On Gentoo, you can just use emerge clickhouse to install ClickHouse from sources.

Launch

To start the server as a daemon, run:

$ sudo clickhouse start

There are also other ways to run ClickHouse:

$ sudo service clickhouse-server start

If you do not have service command, run as

$ sudo /etc/init.d/clickhouse-server start

If you have systemctl command, run as

$ sudo systemctl start clickhouse-server.service

See the logs in the /var/log/clickhouse-server/ directory.

If the server does not start, check the configurations in the file /etc/clickhouse-server/config.xml.

You can also manually launch the server from the console:

$ clickhouse-server --config-file=/etc/clickhouse-server/config.xml

In this case, the log will be printed to the console, which is convenient during development. If the configuration file is in the current directory, you do not need to specify the --config-file parameter. By default, it uses ./config.xml.

ClickHouse supports access restriction settings. They are located in the users.xml file (next to config.xml). By default, access is allowed from anywhere for the default user, without a password. See user/default/networks. For more information, see the section “Configuration Files”.

After launching server, you can use the command-line client to connect to it:

$ clickhouse-client

By default, it connects to localhost:9000 on behalf of the user default without a password. It can also be used to connect to a remote server using --host argument.

The terminal must use UTF-8 encoding. For more information, see the section “Command-line client”.

Example:

$ ./clickhouse-client
ClickHouse client version 0.0.18749.
Connecting to localhost:9000.
Connected to ClickHouse server version 0.0.18749.

:) SELECT 1

SELECT 1

┌─1─┐
│ 1 │
└───┘

1 rows in set. Elapsed: 0.003 sec.

:)

Congratulations, the system works!

To continue experimenting, you can download one of the test data sets or go through tutorial.

Original article