ClickHouse/docs/en/query_language/agg_functions/reference.md

39 KiB
Raw Blame History

Function Reference

count

Counts the number of rows or not-NULL values.

ClickHouse supports the following syntaxes for count:

  • count(expr) or COUNT(DISTINCT expr).
  • count() or COUNT(*). The count() syntax is ClickHouse-specific.

Parameters

The function can take:

Returned value

  • If the function is called without parameters it counts the number of rows.
  • If the expression is passed, then the function counts how many times this expression returned not null. If the expression returns a Nullable-type value, then the result of count stays not Nullable. The function returns 0 if the expression returned NULL for all the rows.

In both cases the type of the returned value is UInt64.

Details

ClickHouse supports the COUNT(DISTINCT ...) syntax. The behavior of this construction depends on the count_distinct_implementation setting. It defines which of the uniq* functions is used to perform the operation. The default is the uniqExact function.

The SELECT count() FROM table query is not optimized, because the number of entries in the table is not stored separately. It chooses a small column from the table and counts the number of values in it.

Examples

Example 1:

SELECT count() FROM t
┌─count()─┐
│       5 │
└─────────┘

Example 2:

SELECT name, value FROM system.settings WHERE name = 'count_distinct_implementation'
┌─name──────────────────────────┬─value─────┐
│ count_distinct_implementation │ uniqExact │
└───────────────────────────────┴───────────┘
SELECT count(DISTINCT num) FROM t
┌─uniqExact(num)─┐
│              3 │
└────────────────┘

This example shows that count(DISTINCT num) is performed by the uniqExact function according to the count_distinct_implementation setting value.

any(x)

Selects the first encountered value. The query can be executed in any order and even in a different order each time, so the result of this function is indeterminate. To get a determinate result, you can use the 'min' or 'max' function instead of 'any'.

In some cases, you can rely on the order of execution. This applies to cases when SELECT comes from a subquery that uses ORDER BY.

When a SELECT query has the GROUP BY clause or at least one aggregate function, ClickHouse (in contrast to MySQL) requires that all expressions in the SELECT, HAVING, and ORDER BY clauses be calculated from keys or from aggregate functions. In other words, each column selected from the table must be used either in keys or inside aggregate functions. To get behavior like in MySQL, you can put the other columns in the any aggregate function.

anyHeavy(x)

Selects a frequently occurring value using the heavy hitters algorithm. If there is a value that occurs more than in half the cases in each of the query's execution threads, this value is returned. Normally, the result is nondeterministic.

anyHeavy(column)

Arguments

  • column The column name.

Example

Take the OnTime data set and select any frequently occurring value in the AirlineID column.

SELECT anyHeavy(AirlineID) AS res
FROM ontime
┌───res─┐
│ 19690 │
└───────┘

anyLast(x)

Selects the last value encountered. The result is just as indeterminate as for the any function.

##groupBitAnd

Applies bitwise AND for series of numbers.

groupBitAnd(expr)

Parameters

expr An expression that results in UInt* type.

Return value

Value of the UInt* type.

Example

Test data:

binary     decimal
00101100 = 44
00011100 = 28
00001101 = 13
01010101 = 85

Query:

SELECT groupBitAnd(num) FROM t

Where num is the column with the test data.

Result:

binary     decimal
00000100 = 4

##groupBitOr

Applies bitwise OR for series of numbers.

groupBitOr(expr)

Parameters

expr An expression that results in UInt* type.

Return value

Value of the UInt* type.

Example

Test data:

binary     decimal
00101100 = 44
00011100 = 28
00001101 = 13
01010101 = 85

Query:

SELECT groupBitOr(num) FROM t

Where num is the column with the test data.

Result:

binary     decimal
01111101 = 125

##groupBitXor

Applies bitwise XOR for series of numbers.

groupBitXor(expr)

Parameters

expr An expression that results in UInt* type.

Return value

Value of the UInt* type.

Example

Test data:

binary     decimal
00101100 = 44
00011100 = 28
00001101 = 13
01010101 = 85

Query:

SELECT groupBitXor(num) FROM t

Where num is the column with the test data.

Result:

binary     decimal
01101000 = 104

groupBitmap

Bitmap or Aggregate calculations from a unsigned integer column, return cardinality of type UInt64, if add suffix -State, then return bitmap object.

groupBitmap(expr)

Parameters

expr An expression that results in UInt* type.

Return value

Value of the UInt64 type.

Example

Test data:

UserID
1
1
2
3

Query:

SELECT groupBitmap(UserID) as num FROM t

Result:

num
3

min(x)

Calculates the minimum.

max(x)

Calculates the maximum.

argMin(arg, val)

Calculates the 'arg' value for a minimal 'val' value. If there are several different values of 'arg' for minimal values of 'val', the first of these values encountered is output.

Example:

┌─user─────┬─salary─┐
│ director │   5000 │
│ manager  │   3000 │
│ worker   │   1000 │
└──────────┴────────┘

SELECT argMin(user, salary) FROM salary

┌─argMin(user, salary)─┐
│ worker               │
└──────────────────────┘

argMax(arg, val)

Calculates the 'arg' value for a maximum 'val' value. If there are several different values of 'arg' for maximum values of 'val', the first of these values encountered is output.

sum(x)

Calculates the sum. Only works for numbers.

sumWithOverflow(x)

Computes the sum of the numbers, using the same data type for the result as for the input parameters. If the sum exceeds the maximum value for this data type, the function returns an error.

Only works for numbers.

sumMap(key, value)

Totals the 'value' array according to the keys specified in the 'key' array. The number of elements in 'key' and 'value' must be the same for each row that is totaled. Returns a tuple of two arrays: keys in sorted order, and values summed for the corresponding keys.

Example:

CREATE TABLE sum_map(
    date Date,
    timeslot DateTime,
    statusMap Nested(
        status UInt16,
        requests UInt64
    )
) ENGINE = Log;
INSERT INTO sum_map VALUES
    ('2000-01-01', '2000-01-01 00:00:00', [1, 2, 3], [10, 10, 10]),
    ('2000-01-01', '2000-01-01 00:00:00', [3, 4, 5], [10, 10, 10]),
    ('2000-01-01', '2000-01-01 00:01:00', [4, 5, 6], [10, 10, 10]),
    ('2000-01-01', '2000-01-01 00:01:00', [6, 7, 8], [10, 10, 10]);
SELECT
    timeslot,
    sumMap(statusMap.status, statusMap.requests)
FROM sum_map
GROUP BY timeslot
┌────────────timeslot─┬─sumMap(statusMap.status, statusMap.requests)─┐
│ 2000-01-01 00:00:00 │ ([1,2,3,4,5],[10,10,20,10,10])               │
│ 2000-01-01 00:01:00 │ ([4,5,6,7,8],[10,10,20,10,10])               │
└─────────────────────┴──────────────────────────────────────────────┘

skewPop

Computes the skewness of a sequence.

skewPop(expr)

Parameters

exprExpression returning a number.

Returned value

The skewness of the given distribution. Type — Float64

Example

SELECT skewPop(value) FROM series_with_value_column

skewSamp

Computes the sample skewness of a sequence.

It represents an unbiased estimate of the skewness of a random variable if passed values form its sample.

skewSamp(expr)

Parameters

exprExpression returning a number.

Returned value

The skewness of the given distribution. Type — Float64. If n <= 1 (n is the size of the sample), then the function returns nan.

Example

SELECT skewSamp(value) FROM series_with_value_column

kurtPop

Computes the kurtosis of a sequence.

kurtPop(expr)

Parameters

exprExpression returning a number.

Returned value

The kurtosis of the given distribution. Type — Float64

Example

SELECT kurtPop(value) FROM series_with_value_column

kurtSamp

Computes the sample kurtosis of a sequence.

It represents an unbiased estimate of the kurtosis of a random variable if passed values form its sample.

kurtSamp(expr)

Parameters

exprExpression returning a number.

Returned value

The kurtosis of the given distribution. Type — Float64. If n <= 1 (n is a size of the sample), then the function returns nan.

Example

SELECT kurtSamp(value) FROM series_with_value_column

timeSeriesGroupSum(uid, timestamp, value)

timeSeriesGroupSum can aggregate different time series that sample timestamp not alignment. It will use linear interpolation between two sample timestamp and then sum time-series together.

  • uid is the time series unique id, UInt64.
  • timestamp is Int64 type in order to support millisecond or microsecond.
  • value is the metric.

The function returns array of tuples with (timestamp, aggregated_value) pairs.

Before using this function make sure timestamp is in ascending order.

Example:

┌─uid─┬─timestamp─┬─value─┐
│ 1   │     2     │   0.2 │
│ 1   │     7     │   0.7 │
│ 1   │    12     │   1.2 │
│ 1   │    17     │   1.7 │
│ 1   │    25     │   2.5 │
│ 2   │     3     │   0.6 │
│ 2   │     8     │   1.6 │
│ 2   │    12     │   2.4 │
│ 2   │    18     │   3.6 │
│ 2   │    24     │   4.8 │
└─────┴───────────┴───────┘
CREATE TABLE time_series(
    uid       UInt64,
    timestamp Int64,
    value     Float64
) ENGINE = Memory;
INSERT INTO time_series VALUES
    (1,2,0.2),(1,7,0.7),(1,12,1.2),(1,17,1.7),(1,25,2.5),
    (2,3,0.6),(2,8,1.6),(2,12,2.4),(2,18,3.6),(2,24,4.8);

SELECT timeSeriesGroupSum(uid, timestamp, value)
FROM (
    SELECT * FROM time_series order by timestamp ASC
);

And the result will be:

[(2,0.2),(3,0.9),(7,2.1),(8,2.4),(12,3.6),(17,5.1),(18,5.4),(24,7.2),(25,2.5)]

timeSeriesGroupRateSum(uid, ts, val)

Similarly timeSeriesGroupRateSum, timeSeriesGroupRateSum will Calculate the rate of time-series and then sum rates together. Also, timestamp should be in ascend order before use this function.

Use this function, the result above case will be:

[(2,0),(3,0.1),(7,0.3),(8,0.3),(12,0.3),(17,0.3),(18,0.3),(24,0.3),(25,0.1)]

avg(x)

Calculates the average. Only works for numbers. The result is always Float64.

uniq

Calculates the approximate number of different values of the argument.

uniq(x[, ...])

Parameters

The function takes a variable number of parameters. Parameters can be Tuple, Array, Date, DateTime, String, or numeric types.

Returned value

Implementation details

Function:

  • Calculates a hash for all parameters in the aggregate, then uses it in calculations.

  • Uses an adaptive sampling algorithm. For the calculation state, the function uses a sample of element hash values up to 65536.

    This algorithm is very accurate and very efficient on the CPU. When the query contains several of these functions, using uniq is almost as fast as using other aggregate functions.

  • Provides the result deterministically (it doesn't depend on the query processing order).

We recommend using this function in almost all scenarios.

See Also

uniqCombined

Calculates the approximate number of different argument values.

uniqCombined(HLL_precision)(x[, ...])

The uniqCombined function is a good choice for calculating the number of different values, but keep in mind that the estimation error for large sets (200 million elements and more) will be larger than the theoretical value due to the poor hash function choice.

Parameters

The function takes a variable number of parameters. Parameters can be Tuple, Array, Date, DateTime, String, or numeric types.

HLL_precision is the base-2 logarithm of the number of cells in HyperLogLog. Optional, you can use the function as uniqCombined(x[, ...]). The default value for HLL_precision is 17, which is effectively 96 KiB of space (2^17 cells, 6 bits each).

Returned value

  • A number UInt64-type number.

Implementation details

Function:

  • Calculates a hash for all parameters in the aggregate, then uses it in calculations.

  • Uses a combination of three algorithms: array, hash table, and HyperLogLog with an error correction table.

    For a small number of distinct elements, an array is used. When the set size is larger, a hash table is used. For a larger number of elements, HyperLogLog is used, which will occupy a fixed amount of memory.

  • Provides the result deterministically (it doesn't depend on the query processing order).

Compared to the uniq function, the uniqCombined:

  • Consumes several times less memory.
  • Calculates with several times higher accuracy.
  • Usually has slightly lower performance. In some scenarios, uniqCombined can perform better than uniq, for example, with distributed queries that transmit a large number of aggregation states over the network.

See Also

uniqHLL12

Calculates the approximate number of different argument values, using the HyperLogLog algorithm.

uniqHLL12(x[, ...])

Parameters

The function takes a variable number of parameters. Parameters can be Tuple, Array, Date, DateTime, String, or numeric types.

Returned value

Implementation details

Function:

  • Calculates a hash for all parameters in the aggregate, then uses it in calculations.

  • Uses the HyperLogLog algorithm to approximate the number of different argument values.

    212 5-bit cells are used. The size of the state is slightly more than 2.5 KB. The result is not very accurate (up to ~10% error) for small data sets (<10K elements). However, the result is fairly accurate for high-cardinality data sets (10K-100M), with a maximum error of ~1.6%. Starting from 100M, the estimation error increases, and the function will return very inaccurate results for data sets with extremely high cardinality (1B+ elements).

  • Provides the determinate result (it doesn't depend on the query processing order).

We don't recommend using this function. In most cases, use the uniq or uniqCombined function.

See Also

uniqExact

Calculates the exact number of different argument values.

uniqExact(x[, ...])

Use the uniqExact function if you absolutely need an exact result. Otherwise use the uniq function.

The uniqExact function uses more memory than uniq, because the size of the state has unbounded growth as the number of different values increases.

Parameters

The function takes a variable number of parameters. Parameters can be Tuple, Array, Date, DateTime, String, or numeric types.

See Also

groupArray(x), groupArray(max_size)(x)

Creates an array of argument values. Values can be added to the array in any (indeterminate) order.

The second version (with the max_size parameter) limits the size of the resulting array to max_size elements. For example, groupArray (1) (x) is equivalent to [any (x)].

In some cases, you can still rely on the order of execution. This applies to cases when SELECT comes from a subquery that uses ORDER BY.

groupArrayInsertAt(x)

Inserts a value into the array in the specified position.

Accepts the value and position as input. If several values are inserted into the same position, any of them might end up in the resulting array (the first one will be used in the case of single-threaded execution). If no value is inserted into a position, the position is assigned the default value.

Optional parameters:

  • The default value for substituting in empty positions.
  • The length of the resulting array. This allows you to receive arrays of the same size for all the aggregate keys. When using this parameter, the default value must be specified.

groupArrayMovingSum

Calculates the moving sum of input values.

groupArrayMovingSum(numbers_for_summing)
groupArrayMovingSum(window_size)(numbers_for_summing)

The function can take the window size as a parameter. If it not specified, the function takes the window size equal to the number of rows in the column.

Parameters

  • numbers_for_summingExpression resulting with a value in a numeric data type.
  • window_size — Size of the calculation window.

Returned values

  • Array of the same size and type as the input data.

Example

The sample table:

CREATE TABLE t
(
    `int` UInt8,
    `float` Float32,
    `dec` Decimal32(2)
)
ENGINE = TinyLog
┌─int─┬─float─┬──dec─┐
│   1 │   1.1 │ 1.10 │
│   2 │   2.2 │ 2.20 │
│   4 │   4.4 │ 4.40 │
│   7 │  7.77 │ 7.77 │
└─────┴───────┴──────┘

The queries:

SELECT
    groupArrayMovingSum(int) AS I,
    groupArrayMovingSum(float) AS F,
    groupArrayMovingSum(dec) AS D
FROM t
┌─I──────────┬─F───────────────────────────────┬─D──────────────────────┐
│ [1,3,7,14] │ [1.1,3.3000002,7.7000003,15.47] │ [1.10,3.30,7.70,15.47] │
└────────────┴─────────────────────────────────┴────────────────────────┘
SELECT
    groupArrayMovingSum(2)(int) AS I,
    groupArrayMovingSum(2)(float) AS F,
    groupArrayMovingSum(2)(dec) AS D
FROM t
┌─I──────────┬─F───────────────────────────────┬─D──────────────────────┐
│ [1,3,6,11] │ [1.1,3.3000002,6.6000004,12.17] │ [1.10,3.30,6.60,12.17] │
└────────────┴─────────────────────────────────┴────────────────────────┘

groupArrayMovingAvg

Calculates the moving average of input values.

groupArrayMovingAvg(numbers_for_summing)
groupArrayMovingAvg(window_size)(numbers_for_summing)

The function can take the window size as a parameter. If it not specified, the function takes the window size equal to the number of rows in the column.

Parameters

  • numbers_for_summingExpression resulting with a value in a numeric data type.
  • window_size — Size of the calculation window.

Returned values

  • Array of the same size and type as the input data.

The function uses rounding towards zero. It truncates the decimal places insignificant for the resulting data type.

Example

The sample table b:

CREATE TABLE t
(
    `int` UInt8,
    `float` Float32,
    `dec` Decimal32(2)
)
ENGINE = TinyLog
┌─int─┬─float─┬──dec─┐
│   1 │   1.1 │ 1.10 │
│   2 │   2.2 │ 2.20 │
│   4 │   4.4 │ 4.40 │
│   7 │  7.77 │ 7.77 │
└─────┴───────┴──────┘

The queries:

SELECT
    groupArrayMovingAvg(int) AS I,
    groupArrayMovingAvg(float) AS F,
    groupArrayMovingAvg(dec) AS D
FROM t
┌─I─────────┬─F───────────────────────────────────┬─D─────────────────────┐
│ [0,0,1,3] │ [0.275,0.82500005,1.9250001,3.8675] │ [0.27,0.82,1.92,3.86] │
└───────────┴─────────────────────────────────────┴───────────────────────┘
SELECT
    groupArrayMovingAvg(2)(int) AS I,
    groupArrayMovingAvg(2)(float) AS F,
    groupArrayMovingAvg(2)(dec) AS D
FROM t
┌─I─────────┬─F────────────────────────────────┬─D─────────────────────┐
│ [0,1,3,5] │ [0.55,1.6500001,3.3000002,6.085] │ [0.55,1.65,3.30,6.08] │
└───────────┴──────────────────────────────────┴───────────────────────┘

groupUniqArray(x), groupUniqArray(max_size)(x)

Creates an array from different argument values. Memory consumption is the same as for the uniqExact function.

The second version (with the max_size parameter) limits the size of the resulting array to max_size elements. For example, groupUniqArray(1)(x) is equivalent to [any(x)].

quantile(level)(x)

Approximates the level quantile. level is a constant, a floating-point number from 0 to 1. We recommend using a level value in the range of [0.01, 0.99] Don't use a level value equal to 0 or 1 use the min and max functions for these cases.

In this function, as well as in all functions for calculating quantiles, the level parameter can be omitted. In this case, it is assumed to be equal to 0.5 (in other words, the function will calculate the median).

Works for numbers, dates, and dates with times. Returns: for numbers Float64; for dates a date; for dates with times a date with time.

Uses reservoir sampling with a reservoir size up to 8192. If necessary, the result is output with linear approximation from the two neighboring values. This algorithm provides very low accuracy. See also: quantileTiming, quantileTDigest, quantileExact.

The result depends on the order of running the query, and is nondeterministic.

When using multiple quantile (and similar) functions with different levels in a query, the internal states are not combined (that is, the query works less efficiently than it could). In this case, use the quantiles (and similar) functions.

quantileDeterministic(level)(x, determinator)

Works the same way as the quantile function, but the result is deterministic and does not depend on the order of query execution.

To achieve this, the function takes a second argument the "determinator". This is a number whose hash is used instead of a random number generator in the reservoir sampling algorithm. For the function to work correctly, the same determinator value should not occur too often. For the determinator, you can use an event ID, user ID, and so on.

Don't use this function for calculating timings. There is a more suitable function for this purpose: quantileTiming.

quantileTiming(level)(x)

Computes the quantile of 'level' with a fixed precision. Works for numbers. Intended for calculating quantiles of page loading time in milliseconds.

If the value is greater than 30,000 (a page loading time of more than 30 seconds), the result is equated to 30,000.

If the total value is not more than about 5670, then the calculation is accurate.

Otherwise:

  • if the time is less than 1024 ms, then the calculation is accurate.
  • otherwise the calculation is rounded to a multiple of 16 ms.

When passing negative values to the function, the behavior is undefined.

The returned value has the Float32 type. If no values were passed to the function (when using quantileTimingIf), 'nan' is returned. The purpose of this is to differentiate these instances from zeros. See the note on sorting NaNs in "ORDER BY clause".

The result is determinate (it doesn't depend on the order of query processing).

For its purpose (calculating quantiles of page loading times), using this function is more effective and the result is more accurate than for the quantile function.

quantileTimingWeighted(level)(x, weight)

Differs from the quantileTiming function in that it has a second argument, "weights". Weight is a non-negative integer. The result is calculated as if the x value were passed weight number of times to the quantileTiming function.

quantileExact(level)(x)

Computes the quantile of 'level' exactly. To do this, all the passed values are combined into an array, which is then partially sorted. Therefore, the function consumes O(n) memory, where 'n' is the number of values that were passed. However, for a small number of values, the function is very effective.

quantileExactWeighted(level)(x, weight)

Computes the quantile of 'level' exactly. In addition, each value is counted with its weight, as if it is present 'weight' times. The arguments of the function can be considered as histograms, where the value 'x' corresponds to a histogram "column" of the height 'weight', and the function itself can be considered as a summation of histograms.

A hash table is used as the algorithm. Because of this, if the passed values are frequently repeated, the function consumes less RAM than quantileExact. You can use this function instead of quantileExact and specify the weight as 1.

quantileTDigest(level)(x)

Approximates the quantile level using the t-digest algorithm. The maximum error is 1%. Memory consumption by State is proportional to the logarithm of the number of passed values.

The performance of the function is lower than for quantile or quantileTiming. In terms of the ratio of State size to precision, this function is much better than quantile.

The result depends on the order of running the query, and is nondeterministic.

median(x)

All the quantile functions have corresponding median functions: median, medianDeterministic, medianTiming, medianTimingWeighted, medianExact, medianExactWeighted, medianTDigest. They are synonyms and their behavior is identical.

quantiles(level1, level2, ...)(x)

All the quantile functions also have corresponding quantiles functions: quantiles, quantilesDeterministic, quantilesTiming, quantilesTimingWeighted, quantilesExact, quantilesExactWeighted, quantilesTDigest. These functions calculate all the quantiles of the listed levels in one pass, and return an array of the resulting values.

varSamp(x)

Calculates the amount Σ((x - x̅)^2) / (n - 1), where n is the sample size and is the average value of x.

It represents an unbiased estimate of the variance of a random variable if passed values form its sample.

Returns Float64. When n <= 1, returns +∞.

varPop(x)

Calculates the amount Σ((x - x̅)^2) / n, where n is the sample size and is the average value of x.

In other words, dispersion for a set of values. Returns Float64.

stddevSamp(x)

The result is equal to the square root of varSamp(x).

stddevPop(x)

The result is equal to the square root of varPop(x).

topK(N)(column)

Returns an array of the most frequent values in the specified column. The resulting array is sorted in descending order of frequency of values (not by the values themselves).

Implements the Filtered Space-Saving algorithm for analyzing TopK, based on the reduce-and-combine algorithm from Parallel Space Saving.

topK(N)(column)

This function doesn't provide a guaranteed result. In certain situations, errors might occur and it might return frequent values that aren't the most frequent values.

We recommend using the N < 10 value; performance is reduced with large N values. Maximum value of N = 65536.

Arguments

  • 'N' is the number of values.
  • ' x ' The column.

Example

Take the OnTime data set and select the three most frequently occurring values in the AirlineID column.

SELECT topK(3)(AirlineID) AS res
FROM ontime
┌─res─────────────────┐
│ [19393,19790,19805] │
└─────────────────────┘

covarSamp(x, y)

Calculates the value of Σ((x - x̅)(y - y̅)) / (n - 1).

Returns Float64. When n <= 1, returns +∞.

covarPop(x, y)

Calculates the value of Σ((x - x̅)(y - y̅)) / n.

corr(x, y)

Calculates the Pearson correlation coefficient: Σ((x - x̅)(y - y̅)) / sqrt(Σ((x - x̅)^2) * Σ((y - y̅)^2)).

simpleLinearRegression

Performs simple (unidimensional) linear regression.

simpleLinearRegression(x, y)

Parameters:

  • x — Column with dependent variable values.
  • y — Column with explanatory variable values.

Returned values:

Constants (a, b) of the resulting line y = a*x + b.

Examples

SELECT arrayReduce('simpleLinearRegression', [0, 1, 2, 3], [0, 1, 2, 3])
┌─arrayReduce('simpleLinearRegression', [0, 1, 2, 3], [0, 1, 2, 3])─┐
│ (1,0)                                                             │
└───────────────────────────────────────────────────────────────────┘
SELECT arrayReduce('simpleLinearRegression', [0, 1, 2, 3], [3, 4, 5, 6])
┌─arrayReduce('simpleLinearRegression', [0, 1, 2, 3], [3, 4, 5, 6])─┐
│ (1,3)                                                             │
└───────────────────────────────────────────────────────────────────┘

stochasticLinearRegression

This function implements stochastic linear regression. It supports custom parameters for learning rate, L2 regularization coefficient, mini-batch size and has few methods for updating weights (Adam (used by default), simple SGD, Momentum, Nesterov).

Parameters

There are 4 customizable parameters. They are passed to the function sequentially, but there is no need to pass all four - default values will be used, however good model required some parameter tuning.

stochasticLinearRegression(1.0, 1.0, 10, 'SGD')
  1. learning rate is the coefficient on step length, when gradient descent step is performed. Too big learning rate may cause infinite weights of the model. Default is 0.00001.
  2. l2 regularization coefficient which may help to prevent overfitting. Default is 0.1.
  3. mini-batch size sets the number of elements, which gradients will be computed and summed to perform one step of gradient descent. Pure stochastic descent uses one element, however having small batches(about 10 elements) make gradient steps more stable. Default is 15.
  4. method for updating weights, they are: Adam (by default), SGD, Momentum, Nesterov. Momentum and Nesterov require little bit more computations and memory, however they happen to be useful in terms of speed of convergance and stability of stochastic gradient methods.

Usage

stochasticLinearRegression is used in two steps: fitting the model and predicting on new data. In order to fit the model and save its state for later usage we use -State combinator, which basically saves the state (model weights, etc). To predict we use function evalMLMethod, which takes a state as an argument as well as features to predict on.

  1. Fitting

    Such query may be used.

    CREATE TABLE IF NOT EXISTS train_data
    (
        param1 Float64,
        param2 Float64,
        target Float64
    ) ENGINE = Memory;
    
    CREATE TABLE your_model ENGINE = Memory AS SELECT
    stochasticLinearRegressionState(0.1, 0.0, 5, 'SGD')(target, param1, param2)
    AS state FROM train_data;
    
    

    Here we also need to insert data into train_data table. The number of parameters is not fixed, it depends only on number of arguments, passed into linearRegressionState. They all must be numeric values. Note that the column with target value(which we would like to learn to predict) is inserted as the first argument.

  2. Predicting

    After saving a state into the table, we may use it multiple times for prediction, or even merge with other states and create new even better models.

    WITH (SELECT state FROM your_model) AS model SELECT
    evalMLMethod(model, param1, param2) FROM test_data
    

    The query will return a column of predicted values. Note that first argument of evalMLMethod is AggregateFunctionState object, next are columns of features.

    test_data is a table like train_data but may not contain target value.

Notes

  1. To merge two models user may create such query:

    SELECT state1 + state2 FROM your_models
    

    where your_models table contains both models. This query will return new AggregateFunctionState object.

  2. User may fetch weights of the created model for its own purposes without saving the model if no -State combinator is used.

    SELECT stochasticLinearRegression(0.01)(target, param1, param2) FROM train_data
    

    Such query will fit the model and return its weights - first are weights, which correspond to the parameters of the model, the last one is bias. So in the example above the query will return a column with 3 values.

See Also

stochasticLogisticRegression

This function implements stochastic logistic regression. It can be used for binary classification problem, supports the same custom parameters as stochasticLinearRegression and works the same way.

Parameters

Parameters are exactly the same as in stochasticLinearRegression: learning rate, l2 regularization coefficient, mini-batch size, method for updating weights. For more information see parameters.

stochasticLogisticRegression(1.0, 1.0, 10, 'SGD')
  1. Fitting

    See the Fitting section in the stochasticLinearRegression description.

    Predicted labels have to be in [-1, 1].

  2. Predicting

    Using saved state we can predict probability of object having label 1.

    WITH (SELECT state FROM your_model) AS model SELECT
    evalMLMethod(model, param1, param2) FROM test_data
    

    The query will return a column of probabilities. Note that first argument of evalMLMethod is AggregateFunctionState object, next are columns of features.

    We can also set a bound of probability, which assigns elements to different labels.

    SELECT ans < 1.1 AND ans > 0.5 FROM
    (WITH (SELECT state FROM your_model) AS model SELECT
    evalMLMethod(model, param1, param2) AS ans FROM test_data)
    

    Then the result will be labels.

    test_data is a table like train_data but may not contain target value.

See Also

Original article